Description
The EHOB handheld combines measurement, curve, and peak value display in one handy device. It accepts any Wheatstone full bridge—such as those from load cells and force transducers—via an M12 socket and displays the measured value on a color LCD as a numerical value, live curve, or saved data record.
Key features at a glance
-
Color LCD display: Equipped with a 3.5-inch color LCD with a resolution of 320x480 pixels. The display offers various modes such as real-time data, live curves, historical graphs, and an overview of saved data records.
-
High sampling rate & precision: Supports full bridges from 88 ohms to 5 kOhm with a high measurement accuracy of 0.05%. The sampling rate is adjustable in steps of 50, 200, 800, up to 3,200 Hz.
-
Storage & alarm function: Peak and valley values are automatically recorded, with up to 200 corresponding data records saved in the device. Additionally, two alarm points can be set for upper/lower limits or a 20 percent overload.
-
Mobility & power: Powered by an integrated, rechargeable 3,200 mAh battery, which is conveniently charged via USB-C. Weighing 290 g and featuring IP65 protection, the handy device is ideal for mobile use.
Technical specifications at a glance
-
Sensor compatibility: Wheatstone full bridge 88...5000 ohms
-
Excitation voltage: 3 V DC.
-
Measuring range & units: Measuring range of 4mV/V Supported units are lb, N, g, Nm, mV/V, kN, and kg.
-
Interfaces & protocols: Equipped with USB-C and RS485. Supports Modbus-RTU, ASCII active upload, and HEX custom upload protocols.
-
Connection: 5-pin M12 socket.
-
Operating conditions: Operating temperature of -20...+50°C IP65 protection class.
-
Dimensions: 132 mm width and 20 mm depth.