{"product_id":"tpmc-kompaktsensor-eigensicher-mkts-ex","title":"TEMG Compact Sensor Intrinsically Safe (MKTS-Ex)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMG\u003c\/strong\u003e is an intrinsically safe compact temperature sensor for hazardous areas, manufacturer type Müller \u003cstrong\u003eMKTS-Ex\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt covers measuring points in gas-hazardous areas – tanks, separators, pipelines with flammable media – without explosion-proof encapsulation or separating component in the field. The sensor tube, housing body and plug insert are made entirely of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the system pressure is \u003cstrong\u003emax. 25 bar\u003c\/strong\u003e, and the protection class is \u003cstrong\u003eIP 65 \/ IP 68\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt is the intrinsically safe version of the same design platform: same housing, same outputs, plus \u003cstrong\u003eATEX\u003c\/strong\u003e and \u003cstrong\u003eIECEx\u003c\/strong\u003e for Zone 0.\u003c\/p\u003e\u003cp\u003eMeasurement is performed with \u003cstrong\u003eone or two Pt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, only in \u003cstrong\u003eClass A\u003c\/strong\u003e, at \u003cstrong\u003emax. 0.1 % of the range\u003c\/strong\u003e. The measurement range of the data table extends from \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e, the smallest span is \u003cstrong\u003e50 K\u003c\/strong\u003e; the medium temperature additionally limits the temperature class: \u003cstrong\u003e+425 °C in T1\u003c\/strong\u003e, +275 °C in T2, +180 °C in T3, +115 °C in T4, +80 °C in T5 and \u003cstrong\u003e+65 °C in T6\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The marking is \u003cstrong\u003eII 1 G Ex ia IIC T6..T1 Ga\u003c\/strong\u003e, plus II 1\/2 G Ga\/Gb and II 2 G Gb; Zone 0, 1 and 2 are approved for gases. The intrinsically safe maximum values at both outputs are \u003cstrong\u003eUi 30 VDC, Ii 110 mA, Pi 1 W\u003c\/strong\u003e, passive 30 V, 100 mA and 100 mW, with \u003cstrong\u003eCi 66 nF\u003c\/strong\u003e and \u003cstrong\u003eLi 330 µH\u003c\/strong\u003e (330 m cable). Both certificate numbers end with X – \u003cstrong\u003eTÜV 21 ATEX 201293 X\u003c\/strong\u003e and \u003cstrong\u003eIECEx TUN 21.0005X\u003c\/strong\u003e – and include special conditions; the source mentions heat backflow, impact and friction, and electrostatic charging. The permissible ambient temperature depends on the temperature class and the output type: current output -40 … +75 °C, voltage output only -40 … +50 °C, passive -50 … +100 °C; in T5 and T6, the source calculates the limit from the power dissipation, the corresponding table should be read before design. Measurement range and medium temperature contradict each other in the data sheet: feature bar -50 … +200 °C, data table -50 … +425 °C, plus the limit per temperature class – the smallest of the three values applies. Two measuring elements are only available without a transmitter; the installation length (10 … 300 mm) must be specified. The product identification GN also appears verbatim on the MKTS-GLEx sheet; please specify the type designation in plain text. Configuration is done with the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e and TrComm. The data sheet mentions \u003cstrong\u003e2014\/34\/EU\u003c\/strong\u003e as a guideline; a CE mark is not documented there. The certificates are available on request and for download according to the source, we do not have them. The version with additional marine approval is the \u003cstrong\u003eTEMF\u003c\/strong\u003e (MKTS-GLEx).\u003c\/p\u003e\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eMarking II 1 G Ex ia IIC T6..T1 Ga, Zone 0, 1 and 2 for gases\u003c\/li\u003e\n\n\u003cli\u003eATEX TÜV 21 ATEX 201293 X and IECEx TUN 21.0005X, both with X\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000 in Class A, max. 0.1 % of the range\u003c\/li\u003e\n\n\u003cli\u003eMedium temperature up to +425 °C in T1, +65 °C in T6\u003c\/li\u003e\n\n\u003cli\u003eUi 30 VDC, Ii 110 mA, Pi 1 W, Ci 66 nF, Li 330 µH\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA, 0…10 V or resistance directly at the connector\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356932546886,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPMC_produkt_f044c3e0-b2af-4bde-9c66-ccac6c918a85.webp?v=1789243717","url":"https:\/\/octogon-sensors.com\/en\/products\/tpmc-kompaktsensor-eigensicher-mkts-ex","provider":"octogon GmbH","version":"1.0","type":"link"}