{"product_id":"temb-einschraub-temperatursensor-pt100-mets-ws","title":"TEMB Screw-in Temperature Sensor Pt100 (METS-WS)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMB\u003c\/strong\u003e is a screw-in temperature sensor with Pt100, measuring amplifier, display, and two limit contacts, manufacturer type Müller \u003cstrong\u003eMETS-WS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is screwed directly into pipes, tanks or units and measures, displays, and switches, without additional electronics in the control cabinet – one device at the process, one signal to the control system, one value to read on site. The protective tube is made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e in standard dimensions Ø 6 × 0.5 mm; with \u003cstrong\u003ePN 25\u003c\/strong\u003e, at least \u003cstrong\u003eIP 65\u003c\/strong\u003e and potted circuit boards, the device weighs approximately \u003cstrong\u003e150 g\u003c\/strong\u003e, and the mounting position is arbitrary.\u003c\/p\u003e\n\u003cp\u003eThe measured value remains readable on site: The display is 4-digit, 8.5 mm high and red, \u003cstrong\u003ereversible by 180°\u003c\/strong\u003e, the head is \u003cstrong\u003erotatable by 330°\u003c\/strong\u003e. Operation is via \u003cstrong\u003ethree buttons (TouchM)\u003c\/strong\u003e. The \u003cstrong\u003etwo limit contacts\u003c\/strong\u003e operate as PNP or NPN with 30 VDC \/ 200 mA, optionally 1000 mA; switching delay and failsafe are adjustable from 0.0 … 999.9 s.\u003c\/p\u003e\n\u003cp\u003eMeasurement is performed with a \u003cstrong\u003ePt100 in 4-wire connection\u003c\/strong\u003e in class A, B or AA (B1\/3 DIN) in the range \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e with a minimum span of 50 °C. The output is \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e in the 2-wire current loop; the accuracy is \u003cstrong\u003emax. 0.1 % of the measuring range\u003c\/strong\u003e plus sensor error at 24 bit resolution. The sensor is powered with \u003cstrong\u003e12 … 35 VDC from the current loop\u003c\/strong\u003e, reverse polarity protected and short-circuit proof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium may be up to +200 °C warm, but the electronics in the head can only tolerate -40 … +85 °C; the manufacturer explicitly states for the series that temperatures above +85 °C can destroy the electronics. Two limit contacts are not available on every connector, but only on M12 five- and eight-pin, on MIL, and on the cable. Higher ranges up to 250 °C are only mentioned in the data sheet upon request. An admissible load of the current loop is not documented in the manufacturer's data sheet; if planning long lines, the value must be inquired there. For programming, the configurator \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e with TrComm software is required. A CE mark is not documented in the manufacturer's data sheet, and a declaration of conformity is not available. Explosion protection is also not documented for this version; the Ex version is the \u003cstrong\u003eTEMD\u003c\/strong\u003e (METS-WTEx).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMeasures, displays, and switches – one device directly at the process\u003c\/li\u003e\n\n\u003cli\u003ePt100 in 4-wire connection, class A, B or AA (B1\/3 DIN)\u003c\/li\u003e\n\n\u003cli\u003eMedium -50 … +200 °C, accuracy max. 0.1 % of the measuring range\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA in the 2-wire loop, 12 … 35 VDC from the loop\u003c\/li\u003e\n\n\u003cli\u003eDisplay 4-digit, reversible by 180°, head rotatable by 330°\u003c\/li\u003e\n\n\u003cli\u003eTwo limit contacts, PNP or NPN, 30 VDC \/ 200 mA\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571, system pressure PN 25, at least IP 65\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927795526,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMB_produkt_438e052b-090e-4e49-80cd-c78da69aa64b.webp?v=1789243685","url":"https:\/\/octogon-sensors.com\/en\/products\/temb-einschraub-temperatursensor-pt100-mets-ws","provider":"octogon GmbH","version":"1.0","type":"link"}