{"product_id":"tcmf-kabelfuhler-mit-passstuck-gl-wt-khg","title":"TCMF Cable Sensor with Adaptor GL (WT-KHG)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMF\u003c\/strong\u003e is a cable sensor with a fitting piece in the GL type-approved version, manufacturer type Müller \u003cstrong\u003eWT-KHG\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures where a mounting bore is already present and type approval is also required: The \u003cstrong\u003efitting piece\u003c\/strong\u003e, a cast sleeve made of \u003cstrong\u003e1.4571\u003c\/strong\u003e, sits on the protective tube and guides the sensor precisely into the bore – a thread or a flange is not necessary for this; you specify the diameter and length. The protective tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e and is available in \u003cstrong\u003eØ 4, 5, or 6 mm\u003c\/strong\u003e; the nominal lengths are between 25 and 65 mm. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt differs from the TCME by its type approval: The manufacturer's sheet shows the GL mark with the number \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e. For this, this version is shorter – the maximum length is \u003cstrong\u003e200 mm\u003c\/strong\u003e instead of 2000 mm, and the cable is at most \u003cstrong\u003e6 m\u003c\/strong\u003e. It also does not have a terminal compartment or electronics: The resistance value is directly at open, bare ends of 70 mm; a transmitter is not documented. \u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3-, or 4-wire configuration\u003c\/strong\u003e and without insulating material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e; the accuracy can be ordered in five stages from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. For insulation, the manufacturer specifies a \u003cstrong\u003etest voltage of 500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval is documented as a mark and number, not as a certificate – the manufacturer's sheet does not name a certifying body, and we do not have the certificate itself; it should be requested before making an assurance to a classification society. The fitting piece is not a documented sealing element: The datasheet does not specify system pressure, sealing effect, or installation tolerance. The operating range is determined by the cable, not the sensor – PVC only withstands \u003cstrong\u003e-5 ... +70 °C\u003c\/strong\u003e, glass fiber \u003cstrong\u003e-60 ... +550 °C\u003c\/strong\u003e, and the cable is in the environment, which is not the medium temperature. Terminal assignment is not documented, neither wire color nor terminal number. The source does not specify a standard for the accuracy classes; CE mark and explosion protection are not documented. Both versions carry the product identification \u003cstrong\u003eKV\u003c\/strong\u003e and are distinguished solely by the \"sensor element\" location: 4 ... 7 is the WT-KHG, 0 ... 3 is the WT-KH.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H5 documented in the manufacturer's sheet\u003c\/li\u003e\n\n\u003cli\u003eFitting piece as a cast sleeve made of 1.4571, dimensions according to specification\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, 2-, 3- or 4-wire configuration\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, maximum nominal length 200 mm\u003c\/li\u003e\n\n\u003cli\u003eCable in standard 2 m, maximum 6 m\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL available up to 2000 mm as TCME (WT-KH)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928155974,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMF_produkt_7c87b86b-2304-44d6-bb0d-0da994943bf3.webp?v=1789243684","url":"https:\/\/octogon-sensors.com\/en\/products\/tcmf-kabelfuhler-mit-passstuck-gl-wt-khg","provider":"octogon GmbH","version":"1.0","type":"link"}