{"product_id":"tcme-kabelfuhler-mit-passstuck-wt-kh","title":"TCME Cable Sensor with Adapter (WT-KH)","description":"\u003cp\u003eThe \u003cstrong\u003eTCME\u003c\/strong\u003e is a resistance thermometer designed as a cable sensor with a fitting, manufacturer type Müller \u003cstrong\u003eWT-KH\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures where a mounting bore already exists: The \u003cstrong\u003efitting\u003c\/strong\u003e, a potted sleeve made of \u003cstrong\u003e1.4571\u003c\/strong\u003e, sits on the protective tube and guides the sensor precisely into the bore – no thread or flange is needed for this. You specify the diameter and length of the fitting, allowing the same sensor to fit an existing mounting. The protective tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e and is available in \u003cstrong\u003eØ 4, 5, or 6 mm\u003c\/strong\u003e, with nominal lengths between 25 and 65 mm, or up to \u003cstrong\u003e2000 mm\u003c\/strong\u003e upon request. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt does not have a terminal compartment or electronics: The resistance value is directly available at open, bare ends of 70 mm, and the cable leads directly to the evaluation without an intermediate stage. A transmitter is not documented, therefore no current signal and no power supply either.\u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e and without insulation material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, and the accuracy can be ordered in five grades from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. For insulation, the manufacturer specifies a \u003cstrong\u003etest voltage of 500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The fitting is not a documented sealing element – the data sheet does not specify system pressure, sealing effect, or installation tolerance; anyone wishing to seal against a medium with it will need written confirmation. The operating range is determined by the cable, not the sensor: PVC only withstands \u003cstrong\u003e-5 ... +70 °C\u003c\/strong\u003e, glass fiber \u003cstrong\u003e-60 ... +550 °C\u003c\/strong\u003e – and the cable is in an environment that is not the medium temperature. \u003cstrong\u003eIP 65 does not apply to the version with screen braiding\u003c\/strong\u003e; what applies there is not stated in the sheet. The nominal length for Ø 4 mm is stated twice differently in the manufacturer's sheet, with 25 and with 35 mm; \u003cstrong\u003e25 mm\u003c\/strong\u003e has been adopted – please specify the length in plain text, as well as the temperature range in °C. The source does not specify a standard for the accuracy classes; CE marks and explosion protection are not documented, and this version does not carry a type approval – the version with \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e is the \u003cstrong\u003eTCMF\u003c\/strong\u003e (WT-KHG). Both carry the product identification \u003cstrong\u003eKV\u003c\/strong\u003e and are distinguished solely by the \"sensor element\" location: 0 ... 3 is the WT-KH, 4 ... 7 is the WT-KHG.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFitting as a potted sleeve made of 1.4571, dimensions as specified\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, 2-, 3- or 4-wire circuit\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 2000 mm upon request\u003c\/li\u003e\n\n\u003cli\u003eFive cable constructions from PVC to glass fiber, -5 ... +550 °C\u003c\/li\u003e\n\n\u003cli\u003eIP 65 up to 250 °C, not with screen braiding\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TCMF (WT-KHG)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927631686,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCME_produkt_4115078f-819b-4be9-825b-82c9c45b783f.webp?v=1789243684","url":"https:\/\/octogon-sensors.com\/en\/products\/tcme-kabelfuhler-mit-passstuck-wt-kh","provider":"octogon GmbH","version":"1.0","type":"link"}