{"product_id":"tcmd-widerstandsthermometer-kabelfuhler-gl-wt-k1g","title":"TCMD Resistance Thermometer Cable Sensor GL (WT-K1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMD\u003c\/strong\u003e is a resistance thermometer cable sensor with GL type approval, manufacturer type Müller \u003cstrong\u003eWT-K1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the approved version of the cable sensor for measuring points where there is no space for a connection head: rigid protective tube, press-fitted transition, fixed cable for evaluation, no terminal compartment, and no electronics. Compared to the \u003cstrong\u003eWT-K1\u003c\/strong\u003e, the selection is limited – it is \u003cstrong\u003eonly available with Ø 6 mm\u003c\/strong\u003e and in nominal lengths of \u003cstrong\u003e46 or 70 mm\u003c\/strong\u003e, limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e, and the cable to \u003cstrong\u003e6 m\u003c\/strong\u003e. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved for up to \u003cstrong\u003e600 °C\u003c\/strong\u003e; the protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is pressed, and a heat shrink tube, optionally a spring, serves as bend protection. Five cable constructions from PVC to glass silk are available, standard length \u003cstrong\u003e2 m\u003c\/strong\u003e. The response time is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e for 6x0.5 mm and \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e for 6x1 mm.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, is used as the measuring element, in a \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e and without insulation material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, and the accuracy can be ordered in five grades from \u003cstrong\u003eClass A\u003c\/strong\u003e to \u003cstrong\u003eB1\/10DIN\u003c\/strong\u003e. The \u003cstrong\u003eresistance value is available immediately\u003c\/strong\u003e at the output, with ferrule on open ends of 70 mm; a transmitter is not documented. The insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The approval \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e is documented as a mark and number, not as a certificate; the certificate must be requested before making an assurance to the classification society. Both versions bear the product identification \u003cstrong\u003eKW\u003c\/strong\u003e; they are differentiated solely by the sensor element position: \u003cstrong\u003e4 ... 7\u003c\/strong\u003e is the WT-K1G, 0 ... 3 is the WT-K1. Terminal assignment is not documented for this version – unlike the TCMC, which shows the colors according to DIN 60751; the assignment should be measured before connecting. The operating range is determined by the cable, not the sensor: PVC withstands -5 ... +70 °C, silicone -45 ... +180 °C, PTFE -75 ... +205 °C, glass silk -60 ... +550 °C. The ambient temperature is not the medium temperature, and for cable sensors, the cable is in the ambient environment. IP 65 does not apply to the shielded braid version. The source does not specify a standard for the accuracy classes; wall thickness, weight, system pressure, CE mark, and explosion protection are not documented. The version without GL approval is the \u003cstrong\u003eTCMC\u003c\/strong\u003e (WT-K1), with three diameters and up to 2000 mm.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H5 documented in manufacturer sheet\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, -200 ... +450 °C\u003c\/li\u003e\n\n\u003cli\u003e2-, 3- or 4-wire circuit, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 46 or 70 mm, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eStandard cable 2 m, maximum 6 m, PVC to glass silk\u003c\/li\u003e\n\n\u003cli\u003eVersion with three diameters as TCMC (WT-K1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927369542,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMD_produkt_94362d05-6d77-4d03-8405-fc81b00c5894.webp?v=1789243684","url":"https:\/\/octogon-sensors.com\/en\/products\/tcmd-widerstandsthermometer-kabelfuhler-gl-wt-k1g","provider":"octogon GmbH","version":"1.0","type":"link"}