{"product_id":"tcmb-thermoelement-kabelfuhler-gl-te-k1g","title":"TCMB Thermocouple Cable Sensor GL (TE-K1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMB\u003c\/strong\u003e is a thermocouple cable sensor with GL type approval, manufacturer type Müller \u003cstrong\u003eTE-K1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the approved version of the cable sensor for measuring points where there is no space for a connection head: rigid protective tube, pressed transition, fixed cable for evaluation, no terminal compartment and no electronics. Compared to the \u003cstrong\u003eTE-K1\u003c\/strong\u003e, it is shorter – the nominal length is between \u003cstrong\u003e30 and 70 mm\u003c\/strong\u003e and is limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e, the cable to \u003cstrong\u003e6 m\u003c\/strong\u003e. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, with \u003cstrong\u003eØ 4, 5 or 6 mm\u003c\/strong\u003e and a wall thickness of \u003cstrong\u003e0.25 … 1 mm\u003c\/strong\u003e; the protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is pressed, with a heat shrink tube serving as kink protection, optionally a spring. Five cable designs from PVC to glass silk are available, standard length \u003cstrong\u003e2 m\u003c\/strong\u003e. The response time is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e for 6x0.5 mm, and \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e for 6x1 mm.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a thermocouple \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e, single or double, without insulating material. The operating range for Type J is \u003cstrong\u003e-200 … +700 °C\u003c\/strong\u003e and for Type K it is \u003cstrong\u003e-200 … +1000 °C\u003c\/strong\u003e. The limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e: \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e in the range -40 … 375 °C and \u003cstrong\u003e±0.004|t|\u003c\/strong\u003e above. The \u003cstrong\u003ethermoelectric voltage is directly available\u003c\/strong\u003e at the output, at open ends or at a TE plug; a transmitter is not documented. For insulation, the manufacturer only specifies a test voltage of \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval \u003cstrong\u003eGL TAA00002H3\u003c\/strong\u003e is confirmed as a mark and number, not as a certificate; the certificate must be requested before making an assurance to the classification society. Both versions bear the product identification \u003cstrong\u003eKT\u003c\/strong\u003e; they are distinguished only by the thermocouple type: \u003cstrong\u003e4 … 7\u003c\/strong\u003e is the TE-K1G, 0 … 3 is the TE-K1. The nominal lengths are stated twice differently in the data sheet – the characteristic values block lists 30, 46, 50 and 70 mm, the order key additionally 50 mm for Ø 4; the desired length must be specified in plain text in the order. The operating range is determined by the cable, not by the sensor: PVC withstands -5 … +70 °C, silicone -45 … +180 °C, PTFE -75 … +250 °C, glass silk -60 … +550 °C. The ambient temperature is not the medium temperature, and for cable sensors, the cable is in the ambient environment. IP 65 does not apply to the version with screen braiding. CE mark and explosion protection are not documented. The version without GL approval is the \u003cstrong\u003eTCMA\u003c\/strong\u003e (TE-K1), available up to 2000 mm.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H3 documented in manufacturer's data sheet\u003c\/li\u003e\n\n\u003cli\u003eThermocouple type J or type K, operating range up to +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLimit deviation according to DIN EN 60584-2 Class 1\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 30 … 70 mm, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eCable standard 2 m, maximum 6 m, PVC to glass silk\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL up to 2000 mm as TCMA (TE-K1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356926878022,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMB_produkt_9d1febc8-db77-463b-8872-ce7f08ddd42b.webp?v=1789243684","url":"https:\/\/octogon-sensors.com\/en\/products\/tcmb-thermoelement-kabelfuhler-gl-te-k1g","provider":"octogon GmbH","version":"1.0","type":"link"}