{"product_id":"msaa-statischer-drehmomentsensor","title":"MSAA static torque sensor","description":"\u003ch1\u003eStatic Torque Sensor MSAA (TRX) in Class 0.05 or 0.1\u003c\/h1\u003e\n\u003cp\u003eThe MSAA is a static torque sensor designed as a reference transducer for test benches, material testing machines, and calibration laboratories – also as a transfer standard. It is bolted between two flanges and measures both clockwise and counter-clockwise torque. The monolithic stainless steel body is fully laser-welded and achieves IP67 protection; annual drift is below 0.003%.\u003c\/p\u003e\n\u003ch3\u003eKey features at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eReference class:\u003c\/b\u003e Accuracy class 0.05 or 0.1 according to EURAMET cg-14 – available as separate order codes.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eEight measuring ranges:\u003c\/b\u003e 50 · 100 · 200 · 500 N·m and 1 · 2 · 3 · 5 kN·m in three sizes (flange Ø 80, 127 and 150 mm).\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eLaser-welded, IP67:\u003c\/b\u003e monolithic stainless steel body, fully welded according to EN 60529.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eLong-term stable:\u003c\/b\u003e annual drift \u0026lt; 0.003%, linearity and hysteresis ±0.03%FS each.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eBolted on both sides:\u003c\/b\u003e 6 × M8 (50\/100 N·m), 8 × M12 (200 N·m to 2 kN·m) or 8 × M16 (3 and 5 kN·m), screws of strength class 12.9.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eMIL7M connector option:\u003c\/b\u003e on request instead of the open cable end.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eRated output:\u003c\/b\u003e 1 mV\/V · rated output tolerance ±0.1%FS · zero balance ±0.5%FS\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eExcitation:\u003c\/b\u003e recommended 10 V · range 1…15 V · max. 18 V\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eResistances:\u003c\/b\u003e input 700 Ω ±2 · output 705 Ω ±2 · insulation resistance \u0026gt; 5 GΩ\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eRelative error Class 0.05 \/ 0.1:\u003c\/b\u003e repeatability 0°-120°-240° ±0.050% \/ ±0.100% · interpolation ±0.025% \/ ±0.050% · hysteresis ±0.063% \/ ±0.125% · zero point ±0.012%FS \/ ±0.025%FS\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eTemperature influence:\u003c\/b\u003e zero point ±0.020%FS and rated output ±0.010%FS per 10 °C\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eTemperatures:\u003c\/b\u003e reference +23 °C · nominal range 0…+60 °C · operating -10…+70 °C · storage -20…+80 °C\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eMechanical limits:\u003c\/b\u003e safe overload 120%FS · ultimate overload 150%FS · breaking load \u0026gt; 300%FS · transverse load max. 50%FS · permissible dynamic amplitude 75%FS\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eConnection:\u003c\/b\u003e shielded PVC cable 5 m, 6 × 0.25 mm² in six-wire circuit (excitation, sense and signal), shield on housing\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eWeight:\u003c\/b\u003e approx. 1.5 kg (50\/100 N·m) · approx. 3 kg (200 N·m to 2 kN·m) · approx. 4.5 kg (3 and 5 kN·m)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eConformity:\u003c\/b\u003e CE, RoHS, REACH · applied standards EN 61326-1 (2013) and EN 61010-1 (2013) · directives 2014\/30\/EU, 2014\/35\/EU, 2011\/65\/EU, 2012\/19\/EU, 1907\/2006 · quality system according to EN ISO 9001 · manufacturer's declaration of conformity from 01.04.2016\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cb\u003eOn request:\u003c\/b\u003e calibration protocol and ACCREDIA calibration certificate according to ISO\/IEC 17025, each clockwise and counter-clockwise\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation instructions\u003c\/h3\u003e\n\u003cp\u003eFor correct measurement, axial forces, transverse forces and bending moments should not occur. If they are present, they must not exceed the permissible values (axial load 19 to 124 kN, transverse load 1.8 to 20 kN per measuring range) and must be reduced if several act simultaneously. The fastening screws are not included in the scope of delivery; the tightening torques are 40 N·m (M8), 140 N·m (M12) and 368 N·m (M16).\u003c\/p\u003e\n\u003cp\u003eNote: For 3 kN·m and 5 kN·m, ACCREDIA calibration cannot be performed in LAT laboratory no. 93; it is possible on request via another accredited laboratory.\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57245601530182,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/MSAA_TRX_produkt_968e086d-74e9-46e6-8aae-c9b897ca0a0e.png?v=1788384919","url":"https:\/\/octogon-sensors.com\/en\/products\/msaa-static-torque-sensor","provider":"octogon GmbH","version":"1.0","type":"link"}