{"product_id":"eomc-io-link-messumformer","title":"EOMC IO-Link transmitter","description":"\u003cp\u003eThe \u003cstrong\u003eEOMC\u003c\/strong\u003e is a single-channel IO-Link transducer as an OEM board, type \u003cstrong\u003eMCUT-E\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt converts the signal from a full strain gauge bridge into a digital measured value – for force and pressure. The measuring range is freely adjustable and \u003cstrong\u003eunitless\u003c\/strong\u003e: the board adopts the unit of the application, whether Newton, kilogram, or bar. Since the value is transmitted via IO-Link, configuration, diagnosis, and device replacement are possible without recalibration.\u003c\/p\u003e\n\u003cp\u003eThe channel accepts \u003cstrong\u003e1 × full strain gauge bridge\u003c\/strong\u003e from 350 Ω, with two parallel full bridges at least 2 × 700 Ω; further bridges are possible, the minimum resistance increases accordingly. The bridge supply provides \u003cstrong\u003e3 V\u003c\/strong\u003e. The measuring range is freely adjustable in the range of \u003cstrong\u003e-3200.0 … +3200.0\u003c\/strong\u003e. The resolution is \u003cstrong\u003e16 bit\u003c\/strong\u003e, the accuracy is \u003cstrong\u003emax. 0.05 % of the measuring range\u003c\/strong\u003e plus sensor error. The filter is 0.5 s, the power-on delay is less than 5 s, and the response time is \u003cstrong\u003e20 ms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe output has an \u003cstrong\u003eIO-Link interface\u003c\/strong\u003e with a signal level of 0 \/ 24 V according to IO-Link specification. The board is powered with \u003cstrong\u003e24 VDC\u003c\/strong\u003e at less than 30 mA in standard operation, a maximum total current of 130 mA; the switching current in SIO mode is a maximum of 100 mA. Polarity reversal is protected – no function, no destruction.\u003c\/p\u003e\n\u003cp\u003eThe board measures \u003cstrong\u003e40 × 17 × 4.5 mm\u003c\/strong\u003e and weighs approximately 6.5 g, material FR4 and PBT, connection via solder pads 2.7 × 1.5 mm, mounting position arbitrary. The operating range is from \u003cstrong\u003e-20 °C to +80 °C\u003c\/strong\u003e, the storage temperature from -20 °C to +85 °C.\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eIO-Link master\u003c\/strong\u003e is required for configuration and operation, as well as the appropriate IODD file from the IODD Finder. The board has \u003cstrong\u003eIP00\u003c\/strong\u003e and must be installed in a housing. It has been tested according to EN 61000-6-2:2005 and EN 61000-6-4:2007 + A1:2011. A CE mark is not documented in the manufacturer's data sheet, a declaration of conformity must be requested before placing it on the market in the EU. This board has \u003cstrong\u003eone\u003c\/strong\u003e channel and no temperature input; the two-channel version with a universal channel is the \u003cstrong\u003eEOME\u003c\/strong\u003e, the round design is the \u003cstrong\u003eEOMD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRegarding the price:\u003c\/strong\u003e The price applies to the board in its basic configuration. The measuring range is freely adjustable via IO-Link, so factory programming is not required. If you still wish to have the board \u003cstrong\u003efactory programmed to your measuring range\u003c\/strong\u003e, this is possible at an extra charge — \u003ca href=\"\/en\/pages\/contact\"\u003eplease ask us about it\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSingle-channel IO-Link transducer for full strain gauge bridge\u003c\/li\u003e\n\n\u003cli\u003eMeasuring range unitless and freely adjustable, -3200.0 … +3200.0\u003c\/li\u003e\n\n\u003cli\u003eResolution 16 bit, accuracy max. 0.05 % of measuring range\u003c\/li\u003e\n\n\u003cli\u003eResponse time 20 ms, filter 0.5 s\u003c\/li\u003e\n\n\u003cli\u003eOnly 40 × 17 × 4.5 mm, weight approx. 6.5 g\u003c\/li\u003e\n\n\u003cli\u003eBridge supply 3 V, from 350 Ω, multiple bridges possible\u003c\/li\u003e\n\n\u003cli\u003eSupply 24 VDC, standard current less than 30 mA\u003c\/li\u003e\n\n\u003cli\u003eOperating range -20 … +80 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306257588550,"sku":null,"price":89.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMC_MCUT-E_titelbild_13a387df-4d02-40e2-8f04-62fb467c4bc8.webp?v=1788951907","url":"https:\/\/octogon-sensors.com\/en\/products\/eomc-io-link-transmitter","provider":"octogon GmbH","version":"1.0","type":"link"}