{"title":"Temperatur - Einbau im Prozess","description":"\u003ch2\u003eTemperaturfühler für den Einbau im Prozess\u003c\/h2\u003e \u003cp\u003eDiese Fühler sitzen im Medium – eingeschraubt, eingetaucht oder eingestochen. Sie messen dort, wo die Temperatur entsteht, und liefern deshalb den schnellsten und genauesten Wert. Ausgewählt wird nach Prozessanschluss, Einbaulänge, Schutzrohr und zulässigem Druck.\u003c\/p\u003e \u003cp\u003eDie Bauformen unterscheiden sich vor allem darin, wie der Fühler befestigt und angeschlossen wird: \u003ca href=\"\/en\/collections\/temperatur-einschraub-te\"\u003eEinschraubfühler\u003c\/a\u003e mit Gewinde, \u003ca href=\"\/en\/collections\/temperatur-mantel-tb\"\u003eMantelfühler\u003c\/a\u003e als biegsame Mantelleitung, \u003ca href=\"\/en\/collections\/temperatur-kabel-tc\"\u003eKabelfühler\u003c\/a\u003e mit fest angeschlossenem Kabel, \u003ca href=\"\/en\/collections\/temperatur-anschlusskopf-tk\"\u003eFühler mit Anschlusskopf\u003c\/a\u003e für die Verdrahtung im Feld, \u003ca href=\"\/en\/collections\/temperatur-einstech-tn\"\u003eEinstechthermometer\u003c\/a\u003e für Stichproben und \u003ca href=\"\/en\/collections\/temperatur-kompakt-tp\"\u003eKompaktsensoren\u003c\/a\u003e mit eingebautem Messumformer. Wo kein Eingriff in den Prozess möglich ist, kommen \u003ca href=\"\/en\/collections\/temperatur-anlegen-beruehrungslos\"\u003eanlegende und berührungslose Fühler\u003c\/a\u003e in Frage.\u003c\/p\u003e","products":[{"product_id":"lpmb-temperaturmessumformer","title":"TEMF Compact Sensor Marine and Ex (MKTS-GL · MKTS-GLEx)","description":"\u003ch1\u003eTPMB Temperature Transducer: Precision and Reliability for Industry\u003c\/h1\u003e\n\u003cp\u003eThe LPMB temperature transducer is a highly developed measuring instrument for precise temperature acquisition in demanding industrial environments. Equipped with high-resolution 24-bit electronics, it delivers exact and stable measurement results.\u003c\/p\u003e\n\u003ch3\u003eThe most important advantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eHigh measurement accuracy:\u003c\/b\u003e Offers a precision of max. 0.1% of the measuring range (plus sensor error) with sensor accuracy according to class A.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eSensor flexibility:\u003c\/b\u003e Compatible with 1x or 2x Pt100 as well as Pt1000 sensors in 2-, 3- or 4-wire connection technology.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eRobust design:\u003c\/b\u003e The housing combines resistant stainless steel (1.4571) with PBT GF30 and offers protection class IP65.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePressure and temperature resistance:\u003c\/b\u003e Designed for media temperatures from -50 °C to +425 °C and a maximum system pressure of up to 25 bar.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli style=\"list-style-type: none;\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eOutput signals:\u003c\/b\u003e 4...20 mA (2-wire) or optionally 0...10 V, 0.5...10.5 V, 2...10 V (3-wire).\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003ePower supply:\u003c\/b\u003e 12...30 VDC.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eOperating temperatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eOperating temperature: -50 °C to +200 °C.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eStorage temperature: -40 °C to +85 °C.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eFilter setting:\u003c\/b\u003e Flexibly adjustable from 5 to 5000 ms.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eMeasurement rate:\u003c\/b\u003e 10 measurements per second.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical connection:\u003c\/b\u003e M12x1 connector (4-pin or 8-pin), valve connector, MIL connector or fixed cable connection.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eProcess connection:\u003c\/b\u003e 1\/2\" thread with a probe diameter of 6 mm.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cb\u003eCertifications \u0026amp; standards:\u003c\/b\u003e CE, RoHS, REACH compliant; optionally available with Ex certifications (e.g. ATEX) on request.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57041754194246,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMF_produkt_c693e71c-2fdd-414d-ac46-12cf9d85c283.webp?v=1789734344"},{"product_id":"tdmb-thermoelement-temperatursensor-mets-ts","title":"TEMA Screw-in Temperature Sensor Type K (METS-TS)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMA\u003c\/strong\u003e is a screw-in temperature sensor with a type K thermocouple, manufacturer type Müller \u003cstrong\u003eMETS-TS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt combines sensor, amplifier, display and two limit contacts in one housing: one device at the process connection, one signal to the control system, one value to read on site. A separate transmitter in the control cabinet becomes unnecessary.\u003c\/p\u003e\n\u003cp\u003eThe thermocouple is a \u003cstrong\u003etype K (NiCr-Ni)\u003c\/strong\u003e with a tolerance of \u003cstrong\u003e±1.5 °C to DIN EN 60584-2 class 1\u003c\/strong\u003e. The measuring range runs from \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e with a minimum span of 50 °C. Amplifier accuracy is \u003cstrong\u003e0.3 % of the range\u003c\/strong\u003e at \u003cstrong\u003e16 bit\u003c\/strong\u003e resolution, the measuring rate 10 measurements per second, the response time 20 ms; the filter is adjustable from 0 to 99 s and the transfer characteristic is linear with temperature.\u003c\/p\u003e\n\u003cp\u003eThe output is \u003cstrong\u003e4 … 20 mA with a superimposed HART signal\u003c\/strong\u003e in the 2-wire current loop, current range 3.8 … 20.5 mA, fault signal 3.6 mA on short circuit and 21 mA on break. Supply is \u003cstrong\u003e12 … 40 VDC from the loop\u003c\/strong\u003e, with reverse polarity protection. Setting is done with the keys at the display or over HART. The \u003cstrong\u003etwo limit contacts\u003c\/strong\u003e are PNP or NPN, 30 VDC \/ 200 mA, optionally 1000 mA.\u003c\/p\u003e\n\u003cp\u003eMechanically: process connection from 1\/4\" to 1\" as well as 1\/4NPT to 1\/2NPT, protective tube in \u003cstrong\u003e1.4571\u003c\/strong\u003e, Ø 6 × 0.5 mm, 100 mm neck tube optional, insertion lengths from 50 to 1000 mm, PBT GF30 housing, polycarbonate display top, system pressure \u003cstrong\u003ePN 25\u003c\/strong\u003e, protection at least \u003cstrong\u003eIP 65\u003c\/strong\u003e with encapsulated boards, any mounting position.\u003c\/p\u003e\n\u003cp\u003eTwo points for sizing. \u003cstrong\u003eThe ambient temperature is not the medium temperature.\u003c\/strong\u003e The medium may reach +200 °C, the electronics in the head only -20 … +80 °C – the manufacturer states explicitly for this series that temperatures above +85 °C can destroy the electronics. And: \u003cstrong\u003ewhich connector carries how many limit contacts is not a free choice.\u003c\/strong\u003e Ten connections are available, but two contacts are only possible on M12 five- and eight-pin, on MIL and on the cable version.\u003c\/p\u003e\n\u003cp\u003eProgramming requires the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e configurator with the TrComm software. No CE marking is documented in the manufacturer's data sheet and no declaration of conformity is available. The Ex version of this design is the \u003cstrong\u003eTEMD\u003c\/strong\u003e (METS-WTEx).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType K thermocouple, ±1.5 °C to DIN EN 60584-2 class 1\u003c\/li\u003e\n\u003cli\u003eMedium -50 to +200 °C, minimum span 50 °C\u003c\/li\u003e\n\u003cli\u003e4 … 20 mA with HART in the 2-wire loop\u003c\/li\u003e\n\u003cli\u003eAccuracy 0.3 % of the range, 16 bit\u003c\/li\u003e\n\u003cli\u003eDisplay and keys on the device, plus HART\u003c\/li\u003e\n\u003cli\u003eTwo limit contacts, PNP or NPN\u003c\/li\u003e\n\u003cli\u003eProtective tube 1.4571, insertion lengths 50 to 1000 mm\u003c\/li\u003e\n\u003cli\u003eSystem pressure PN 25, protection at least IP 65\u003c\/li\u003e\n\u003cli\u003eTen electrical connections to choose from\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57245618667846,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMA_METS-TS_titelbild_749e8a5d-fb95-407c-8fd9-f49a7fb5ec98.webp?v=1788951931"},{"product_id":"tcma-thermoelement-kabelfuhler-te-k1","title":"TCMA Thermocouple Cable Sensor (TE-K1)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMA\u003c\/strong\u003e is a thermocouple cable sensor, manufacturer type Müller \u003cstrong\u003eTE-K1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures at measuring points where there is no space for a connection head: a rigid protective tube, pressed firmly at the transition, and a fixed cable leading directly to the evaluation. There is no terminal compartment, no electronics and no housing – the sensor is inserted into a bore, a compression fitting or a flange. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved for up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, with \u003cstrong\u003eØ 4, 5 or 6 mm\u003c\/strong\u003e and a wall thickness of \u003cstrong\u003e0.25 … 1 mm\u003c\/strong\u003e; the nominal length is between \u003cstrong\u003e30 and 70 mm\u003c\/strong\u003e, up to \u003cstrong\u003e2000 mm\u003c\/strong\u003e on request. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is made with a hexagonal crimp, with a ring crimp available on request; a shrink sleeve serves as bend protection, optionally a spring. Five cable constructions from PVC to glass silk are available, standard \u003cstrong\u003e2 m\u003c\/strong\u003e long. The response time for 6×0.5 mm is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e, and for 6×1 mm is \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a thermocouple \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e, single or double, without insulating material. The application range for Type J is from \u003cstrong\u003e-200 … +700 °C\u003c\/strong\u003e and for Type K from \u003cstrong\u003e-200 … +1000 °C\u003c\/strong\u003e. The limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e: \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e in the range -40 … 375 °C and \u003cstrong\u003e±0.004|t|\u003c\/strong\u003e above. The \u003cstrong\u003ethermoelectric voltage is immediately available\u003c\/strong\u003e at the output, at open ends of 70 mm or at a TE plug; a transmitter is not documented. For insulation, the manufacturer only specifies the test voltage \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The application range is determined by the cable, not by the sensor – PVC withstands \u003cstrong\u003e-5 … +70 °C\u003c\/strong\u003e, silicone -45 … +180 °C, PTFE -75 … +250 °C and glass silk \u003cstrong\u003e-60 … +550 °C\u003c\/strong\u003e; a Type K up to +1000 °C is useless with a PVC cable. The ambient temperature is not the medium temperature, and for a cable sensor, the cable is in the ambient. IP 65 does not apply to the version with shield braiding. The accuracy table extends further than the application range: Type J is specified up to 750 °C there, but in the application range up to 700 °C. A terminal assignment is not documented – the polarity must be measured before connecting. Weight, system pressure, CE mark and explosion protection are not documented. Both versions bear the product identification \u003cstrong\u003eKT\u003c\/strong\u003e; they are distinguished solely by the thermocouple type: \u003cstrong\u003e0 … 3\u003c\/strong\u003e is the TE-K1, 4 … 7 is the TE-K1G. The version with GL type approval is the \u003cstrong\u003eTCMB\u003c\/strong\u003e (TE-K1G).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eThermocouple Type J or Type K, application range up to +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLimit deviation according to DIN EN 60584-2 Class 1\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 30 … 70 mm, up to 2000 mm on request\u003c\/li\u003e\n\n\u003cli\u003eFive cable constructions from PVC to glass silk, -5 … +550 °C\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TCMB (TE-K1G)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356926746950,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMA_produkt_4b27e6f5-e566-4848-b323-4714ca20567a.webp?v=1789243659"},{"product_id":"tkma-thermoelement-mit-anschlusskopf-b-te-mr1","title":"TKMA Thermocouple with Terminal Head B (TE-MR1)","description":"\u003cp\u003eThe \u003cstrong\u003eTKMA\u003c\/strong\u003e is a thermocouple with connection head B, manufacturer type Müller \u003cstrong\u003eTE-MR1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for permanent installation in pipes, tanks, and systems where the measuring point requires a wired connection. The aluminum \u003cstrong\u003econnection head\u003c\/strong\u003e is located above the process, accommodates a ceramic terminal block with connection posts, and routes the cable through an \u003cstrong\u003eM20x1.5\u003c\/strong\u003e gland; the process connection \u003cstrong\u003eM24x1.5\u003c\/strong\u003e is located on the head, and the protection class is \u003cstrong\u003eIP 54\u003c\/strong\u003e. The protection tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e or \u003cstrong\u003e2.4816 (Inconel 600)\u003c\/strong\u003e withstands temperatures up to 600 °C or 1100 °C, respectively. Nominal lengths range from 50 to 1000 mm, with a maximum length of \u003cstrong\u003e2000 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTwo designs cover both mounting types: the screw-in sensor (ES) with process thread on the pipe and the immersion sensor (ET), which is mounted with accessories; available with twelve protection tube diameters from \u003cstrong\u003e1.5 to 15 mm\u003c\/strong\u003e. In the case of the mineral-insulated cable element, the first approximately \u003cstrong\u003e50 mm\u003c\/strong\u003e from the head are rigid, the rest flexible – allowing the sensor to be guided to the measuring point even without straight access. The manufacturer lists connection cables, compression fittings, and a \u003cstrong\u003etransmitter\u003c\/strong\u003e as accessories.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a thermocouple \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e, single or double, as a standard element or as a mineral-insulated cable element. The operating range for Type J is from \u003cstrong\u003e-200 ... +700 °C\u003c\/strong\u003e, for Type K from \u003cstrong\u003e-200 ... +1000 °C\u003c\/strong\u003e; the limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e with \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e from -40 ... 375 °C and above ±0.004|t|. The thermoelectric voltage is available at the ceramic terminal block in the head, and the test voltage is \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the connection head is limited to \u003cstrong\u003e480 °C\u003c\/strong\u003e, while the measuring element reaches up to 1000 °C; here, the head, not the element, is decisive. The accuracy table for Type J extends to 750 °C, but the operating range up to 700 °C is authoritative. \u003cstrong\u003eIP 54 applies only to the connection head\u003c\/strong\u003e; the source does not specify a protection class for the protection tube. For the transmitter, it does not specify the type, output signal, or power supply, and terminal assignment is also missing. Weight, system pressure, CE mark, and explosion protection are not documented, and \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e is not a product approval; this version does not have type approval. The GL version is the \u003cstrong\u003eTKMB\u003c\/strong\u003e (TE-MR1G, TAA00002H3); both carry the product identifier \u003cstrong\u003eKC\u003c\/strong\u003e, distinguished only by the first digit – 0 ... 3 for TKMA, 4 ... 7 for TKMB.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eThermocouple Type J or Type K, single or double\u003c\/li\u003e\n\n\u003cli\u003eOperating range Type J -200 ... +700 °C, Type K -200 ... +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eConnection head B made of aluminum, IP 54, cable entry M20x1.5\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 1.4571 or 2.4816, Ø 1.5 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eInstallation lengths 50 to 1000 mm, maximum length 2000 mm\u003c\/li\u003e\n\n\u003cli\u003eGL version TAA00002H3 available as TKMB\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356926812486,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TKMA_produkt_9d9cb0ff-142f-4e0c-bdbc-a8d86fe9c15e.webp?v=1789243685"},{"product_id":"tcmb-thermoelement-kabelfuhler-gl-te-k1g","title":"TCMB Thermocouple Cable Sensor GL (TE-K1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMB\u003c\/strong\u003e is a thermocouple cable sensor with GL type approval, manufacturer type Müller \u003cstrong\u003eTE-K1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the approved version of the cable sensor for measuring points where there is no space for a connection head: rigid protective tube, pressed transition, fixed cable for evaluation, no terminal compartment and no electronics. Compared to the \u003cstrong\u003eTE-K1\u003c\/strong\u003e, it is shorter – the nominal length is between \u003cstrong\u003e30 and 70 mm\u003c\/strong\u003e and is limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e, the cable to \u003cstrong\u003e6 m\u003c\/strong\u003e. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, with \u003cstrong\u003eØ 4, 5 or 6 mm\u003c\/strong\u003e and a wall thickness of \u003cstrong\u003e0.25 … 1 mm\u003c\/strong\u003e; the protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is pressed, with a heat shrink tube serving as kink protection, optionally a spring. Five cable designs from PVC to glass silk are available, standard length \u003cstrong\u003e2 m\u003c\/strong\u003e. The response time is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e for 6x0.5 mm, and \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e for 6x1 mm.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a thermocouple \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e, single or double, without insulating material. The operating range for Type J is \u003cstrong\u003e-200 … +700 °C\u003c\/strong\u003e and for Type K it is \u003cstrong\u003e-200 … +1000 °C\u003c\/strong\u003e. The limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e: \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e in the range -40 … 375 °C and \u003cstrong\u003e±0.004|t|\u003c\/strong\u003e above. The \u003cstrong\u003ethermoelectric voltage is directly available\u003c\/strong\u003e at the output, at open ends or at a TE plug; a transmitter is not documented. For insulation, the manufacturer only specifies a test voltage of \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval \u003cstrong\u003eGL TAA00002H3\u003c\/strong\u003e is confirmed as a mark and number, not as a certificate; the certificate must be requested before making an assurance to the classification society. Both versions bear the product identification \u003cstrong\u003eKT\u003c\/strong\u003e; they are distinguished only by the thermocouple type: \u003cstrong\u003e4 … 7\u003c\/strong\u003e is the TE-K1G, 0 … 3 is the TE-K1. The nominal lengths are stated twice differently in the data sheet – the characteristic values block lists 30, 46, 50 and 70 mm, the order key additionally 50 mm for Ø 4; the desired length must be specified in plain text in the order. The operating range is determined by the cable, not by the sensor: PVC withstands -5 … +70 °C, silicone -45 … +180 °C, PTFE -75 … +250 °C, glass silk -60 … +550 °C. The ambient temperature is not the medium temperature, and for cable sensors, the cable is in the ambient environment. IP 65 does not apply to the version with screen braiding. CE mark and explosion protection are not documented. The version without GL approval is the \u003cstrong\u003eTCMA\u003c\/strong\u003e (TE-K1), available up to 2000 mm.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H3 documented in manufacturer's data sheet\u003c\/li\u003e\n\n\u003cli\u003eThermocouple type J or type K, operating range up to +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLimit deviation according to DIN EN 60584-2 Class 1\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 30 … 70 mm, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eCable standard 2 m, maximum 6 m, PVC to glass silk\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL up to 2000 mm as TCMA (TE-K1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356926878022,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMB_produkt_9d1febc8-db77-463b-8872-ce7f08ddd42b.webp?v=1789243684"},{"product_id":"tkmb-thermoelement-mit-anschlusskopf-b-gl-te-mr1g","title":"TKMB Thermocouple with Connection Head B GL (TE-MR1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTKMB\u003c\/strong\u003e is a thermocouple with connection head B in the GL type-approved version, manufacturer type Müller \u003cstrong\u003eTE-MR1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for fixed plant installation at measuring points where type approval is required: The manufacturer's sheet lists the GL mark with the number \u003cstrong\u003eTAA00002H3\u003c\/strong\u003e. The aluminum \u003cstrong\u003econnection head\u003c\/strong\u003e accommodates a ceramic base with connection posts. The process connection \u003cstrong\u003eM24x1.5\u003c\/strong\u003e and the cable gland \u003cstrong\u003eM20x1.5\u003c\/strong\u003e are located on the head, and the protection class is \u003cstrong\u003eIP 54\u003c\/strong\u003e. The protection tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e or \u003cstrong\u003e2.4816 (Inconel 600)\u003c\/strong\u003e withstands temperatures up to 600 °C or 1100 °C respectively, and the process pressure is \u003cstrong\u003emax. PN16\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCompared to the TKMA, this is not the same product with an additional marking: This version is limited to a length of \u003cstrong\u003e200 mm\u003c\/strong\u003e instead of 2000 mm and has a different accessory set. The source does not list a transmitter here as an accessory, but it does include connection cables up to 6 m, compression fittings, and a sheet metal flange. Screw-in (ES) and immersion (ET) designs are available, as well as protection tube diameters of \u003cstrong\u003e3 to 15 mm\u003c\/strong\u003e; the selection is limited for mineral insulated elements and in the immersion design.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e thermocouple, single or double, as a standard element or as a mineral insulated element. The operating range for Type J is from \u003cstrong\u003e-200 ... +700 °C\u003c\/strong\u003e, and for Type K from \u003cstrong\u003e-200 ... +1000 °C\u003c\/strong\u003e; the limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e with \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e from -40 ... 375 °C and ±0.004|t| above. The thermovoltage is available at the ceramic base in the head, the test voltage is \u003cstrong\u003e500 VDC\u003c\/strong\u003e, and the response time on the 3x0.4 mm tube is \u003cstrong\u003et90 6 s\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The approval is documented as a mark and number, not as a certificate – the manufacturer's sheet does not mention a certifying body, and the certificate is not available; it should be requested before any assurance. Both bear the product identification \u003cstrong\u003eKC\u003c\/strong\u003e, distinguished solely by the first digit of the order code: \u003cstrong\u003e4 ... 7\u003c\/strong\u003e for the TKMB, 0 ... 3 for the TKMA – the English version prints 0 ... 3 for the GL variant here, which would make it unorderable unnoticed. The ambient temperature is not the medium temperature: The head is limited to \u003cstrong\u003e480 °C\u003c\/strong\u003e, the measuring element reaches up to 1000 °C. The source states 15 s for the 6x0.5 mm tube here, while the TKMA sheet states 30.9 s – it does not explain the difference. IP 54 applies only to the connection head; terminal assignment, CE mark, and explosion protection are not documented.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H3, documented as a mark and number\u003c\/li\u003e\n\n\u003cli\u003eThermocouple Type J or Type K, single or double\u003c\/li\u003e\n\n\u003cli\u003eOperating range Type J -200 ... +700 °C, Type K -200 ... +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eProcess pressure max. PN16, installation lengths 50 to 200 mm\u003c\/li\u003e\n\n\u003cli\u003eAluminum connection head B, IP 54, cable gland M20x1.5\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 1.4571 or 2.4816, Ø 3 to 15 mm\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL up to 2000 mm length available as TKMA\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356926976326,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TKMB_produkt_98442ae0-e2b7-450d-9939-b975dd78c200.webp?v=1789243685"},{"product_id":"tcmc-widerstandsthermometer-kabelfuhler-wt-k1","title":"TCMC Resistance Thermometer Cable Sensor (WT-K1)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMC\u003c\/strong\u003e is a resistance thermometer cable probe, manufacturer type Müller \u003cstrong\u003eWT-K1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures at measuring points where there is no space for a connection head: a rigid protective tube, pressed firmly at the transition, and a fixed cable directly leading to evaluation. There is no terminal compartment and no electronics – the probe is inserted into a bore, a compression fitting, or a flange. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, with \u003cstrong\u003eØ 4, 5, or 6 mm\u003c\/strong\u003e and a wall thickness of \u003cstrong\u003e0.25 … 1 mm\u003c\/strong\u003e; the nominal lengths are \u003cstrong\u003e30, 46, 50, and 70 mm\u003c\/strong\u003e, the maximum length \u003cstrong\u003e2000 mm\u003c\/strong\u003e. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is pressed; a heat shrink tube serves as bend protection, optionally a spring or a crimped transition. The standard cable length is \u003cstrong\u003e2 m\u003c\/strong\u003e. The response time at 6×0.5 mm is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e, at 6×1 mm \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e and without insulating material, serves as the measuring element. The sensor's operating range extends from \u003cstrong\u003e-200 … +450 °C\u003c\/strong\u003e; the accuracy can be ordered in five stages from \u003cstrong\u003eClass A\u003c\/strong\u003e to \u003cstrong\u003eB1\/10DIN\u003c\/strong\u003e. The \u003cstrong\u003eresistance value is immediately available\u003c\/strong\u003e at the output, at open ends of 70 mm; the core colors are shown in the data sheet \u003cstrong\u003eaccording to DIN 60751\u003c\/strong\u003e. A transmitter is not documented. For insulation, the manufacturer only specifies a test voltage of \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The operating range is determined by the cable, not the probe – PVC withstands \u003cstrong\u003e-5 … +70 °C\u003c\/strong\u003e, silicone -45 … +180 °C, PTFE -75 … +205 °C, and glass fiber \u003cstrong\u003e-60 … +550 °C\u003c\/strong\u003e; a sensor up to +450 °C is useless with a PVC cable. The ambient temperature is not the medium temperature – with a cable probe, the cable is in the ambient environment. IP 65 does not apply to the version with braided shielding. The source does not specify a standard for the accuracy classes – if a limit deviation in Kelvin needs to be guaranteed, it must be requested in writing from the manufacturer. In the order key, the digit 3 is missing for the nominal length; digits 0, 1, 2, 4, and 5 are specified; therefore, the length must be clearly stated in the order. Weight, system pressure, CE mark, and explosion protection are not documented. Both versions carry the product identifier \u003cstrong\u003eKW\u003c\/strong\u003e; they are distinguished only by the sensor element position: \u003cstrong\u003e0 … 3\u003c\/strong\u003e is the WT-K1, 4 … 7 is the WT-K1G. The GL version is the \u003cstrong\u003eTCMD\u003c\/strong\u003e (WT-K1G) with the number \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e, only with Ø 6 mm and two nominal lengths.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, -200 … +450 °C\u003c\/li\u003e\n\n\u003cli\u003e2-, 3- or 4-wire circuit, core colors according to DIN 60751\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 30 … 70 mm, up to 2000 mm on request\u003c\/li\u003e\n\n\u003cli\u003eFive cable constructions from PVC to glass fiber, -5 … +550 °C\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TCMD (WT-K1G)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927009094,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMC_produkt_7fc0bea8-e120-475c-84c7-d19caf0513be.webp?v=1789243684"},{"product_id":"tkmc-widerstandsthermometer-mit-anschlusskopf-b-wt-mr1","title":"TKMC Resistance Thermometer with Connection Head B (WT-MR1)","description":"\u003cp\u003eThe \u003cstrong\u003eTKMC\u003c\/strong\u003e is a resistance thermometer with connection head B, manufacturer type Müller \u003cstrong\u003eWT-MR1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for fixed system installation in pipes, tanks, and systems where the measuring point requires a wireable connection. The aluminum \u003cstrong\u003econnection head\u003c\/strong\u003e sits above the process, accommodates a ceramic base with connection posts, and routes the cable out through an \u003cstrong\u003eM20x1.5\u003c\/strong\u003e screw connection; the process connection at the head is \u003cstrong\u003eM24x1.5\u003c\/strong\u003e, and the protection class is \u003cstrong\u003eIP 54\u003c\/strong\u003e. The protective tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e or \u003cstrong\u003e2.4816 (Inconel 600)\u003c\/strong\u003e withstands temperatures \u003cstrong\u003eup to 600 °C\u003c\/strong\u003e, with nominal lengths ranging from 50 to 1000 mm and a maximum length of \u003cstrong\u003e2000 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTwo designs cover both mounting types: the screw-in sensor (ES) with process thread on the pipe, and the immersion sensor (ET), which is mounted with accessories; in addition, eleven protection tube diameters from \u003cstrong\u003e3 to 15 mm\u003c\/strong\u003e are available. For the mineral-insulated element, the first approximately \u003cstrong\u003e50 mm\u003c\/strong\u003e from the head are rigid, and the rest is flexible – allowing the sensor to be inserted even without direct access. The manufacturer lists connection cables, compression fittings, and a \u003cstrong\u003etransmitter\u003c\/strong\u003e as accessories.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3- or 4-wire configuration\u003c\/strong\u003e, as a standard element or as a mineral-insulated element. The sensor's operating range is \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, with accuracy ranging in five steps from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. The resistance is located on the ceramic base in the head, and the test voltage is \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the head is limited to \u003cstrong\u003e480 °C\u003c\/strong\u003e, and the element ends at \u003cstrong\u003e450 °C\u003c\/strong\u003e. The source does not specify a standard for the accuracy classes; those who need figures for the limit deviation should request them from the manufacturer. \u003cstrong\u003eIP 54 applies only to the connection head\u003c\/strong\u003e; the source does not specify a protection class for the protective tube. For the mineral-insulated element, the English version additionally mentions 1.5 mm, but the order key does not offer a digit for this – here, \u003cstrong\u003e3, 4.5, and 6 mm\u003c\/strong\u003e apply. The source does not specify the type, output signal, or supply for the transmitter, and a terminal assignment is missing. Weight, system pressure, CE mark, and explosion protection are not documented, and it does not have type approval. The GL version is the \u003cstrong\u003eTKMD\u003c\/strong\u003e (WT-MR1G, TAA00002H5); both carry the product identifier \u003cstrong\u003eKD\u003c\/strong\u003e, differing only in the first digit – 0 ... 3 for TKMC, 4 ... 7 for TKMD.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, 2-, 3- or 4-wire configuration\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, five classes from Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eConnection head B made of aluminum, IP 54, cable gland M20x1.5\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 or 2.4816, Ø 3 to 15 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eInsertion lengths 50 to 1000 mm, maximum 2000 mm\u003c\/li\u003e\n\n\u003cli\u003eGL version TAA00002H5 available as TKMD\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927107398,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TKMC_produkt_7675337e-980b-4223-a5fe-1801b825aa0d.webp?v=1789243716"},{"product_id":"tcmd-widerstandsthermometer-kabelfuhler-gl-wt-k1g","title":"TCMD Resistance Thermometer Cable Sensor GL (WT-K1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMD\u003c\/strong\u003e is a resistance thermometer cable sensor with GL type approval, manufacturer type Müller \u003cstrong\u003eWT-K1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the approved version of the cable sensor for measuring points where there is no space for a connection head: rigid protective tube, press-fitted transition, fixed cable for evaluation, no terminal compartment, and no electronics. Compared to the \u003cstrong\u003eWT-K1\u003c\/strong\u003e, the selection is limited – it is \u003cstrong\u003eonly available with Ø 6 mm\u003c\/strong\u003e and in nominal lengths of \u003cstrong\u003e46 or 70 mm\u003c\/strong\u003e, limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e, and the cable to \u003cstrong\u003e6 m\u003c\/strong\u003e. The protective tube is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) and is approved for up to \u003cstrong\u003e600 °C\u003c\/strong\u003e; the protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe transition to the cable is pressed, and a heat shrink tube, optionally a spring, serves as bend protection. Five cable constructions from PVC to glass silk are available, standard length \u003cstrong\u003e2 m\u003c\/strong\u003e. The response time is \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e for 6x0.5 mm and \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e for 6x1 mm.\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, is used as the measuring element, in a \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e and without insulation material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, and the accuracy can be ordered in five grades from \u003cstrong\u003eClass A\u003c\/strong\u003e to \u003cstrong\u003eB1\/10DIN\u003c\/strong\u003e. The \u003cstrong\u003eresistance value is available immediately\u003c\/strong\u003e at the output, with ferrule on open ends of 70 mm; a transmitter is not documented. The insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The approval \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e is documented as a mark and number, not as a certificate; the certificate must be requested before making an assurance to the classification society. Both versions bear the product identification \u003cstrong\u003eKW\u003c\/strong\u003e; they are differentiated solely by the sensor element position: \u003cstrong\u003e4 ... 7\u003c\/strong\u003e is the WT-K1G, 0 ... 3 is the WT-K1. Terminal assignment is not documented for this version – unlike the TCMC, which shows the colors according to DIN 60751; the assignment should be measured before connecting. The operating range is determined by the cable, not the sensor: PVC withstands -5 ... +70 °C, silicone -45 ... +180 °C, PTFE -75 ... +205 °C, glass silk -60 ... +550 °C. The ambient temperature is not the medium temperature, and for cable sensors, the cable is in the ambient environment. IP 65 does not apply to the shielded braid version. The source does not specify a standard for the accuracy classes; wall thickness, weight, system pressure, CE mark, and explosion protection are not documented. The version without GL approval is the \u003cstrong\u003eTCMC\u003c\/strong\u003e (WT-K1), with three diameters and up to 2000 mm.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H5 documented in manufacturer sheet\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, -200 ... +450 °C\u003c\/li\u003e\n\n\u003cli\u003e2-, 3- or 4-wire circuit, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 6 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eNominal length 46 or 70 mm, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eStandard cable 2 m, maximum 6 m, PVC to glass silk\u003c\/li\u003e\n\n\u003cli\u003eVersion with three diameters as TCMC (WT-K1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927369542,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMD_produkt_94362d05-6d77-4d03-8405-fc81b00c5894.webp?v=1789243684"},{"product_id":"tbma-mantel-thermoelement-te-mk1","title":"TBMA Sheathed Thermocouple (TE-MK1)","description":"\u003cp\u003eThe \u003cstrong\u003eTBMA\u003c\/strong\u003e is a sheathed thermocouple with a flexible protection tube and a fixed connection cable, manufacturer type Müller \u003cstrong\u003eTE-MK1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures in installation locations that a rigid protection tube cannot reach. The sheathed tube can be bent to a radius of \u003cstrong\u003emin. 5 × Ø protection tube\u003c\/strong\u003e; the cable is firmly attached to the sensor, eliminating the need for a connection head that requires space and wall clearance. The protection tube is made of \u003cstrong\u003e2.4816\u003c\/strong\u003e (Inconel 600), specified as a material up to \u003cstrong\u003e1100 °C\u003c\/strong\u003e, the connecting sleeve is made of \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti), the protection class is \u003cstrong\u003eIP 65\u003c\/strong\u003e up to \u003cstrong\u003e250 °C\u003c\/strong\u003e. Available in four diameters from \u003cstrong\u003e1.5 to 6 mm\u003c\/strong\u003e and with a nominal length of \u003cstrong\u003e100 mm\u003c\/strong\u003e as standard, up to \u003cstrong\u003e2000 mm\u003c\/strong\u003e on request, it also fits into narrow and deep bores. Clamp fittings and sheet metal flanges from the accessories are used for fastening.\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003eØ 3 mm\u003c\/strong\u003e, the manufacturer specifies a response time of \u003cstrong\u003et90 5 s\u003c\/strong\u003e and \u003cstrong\u003et50 2 s\u003c\/strong\u003e – meaning the sensor still responds usefully to rapid temperature changes. Connection is via open ends or via TE connectors in standard or mini design; five cable versions from PVC to glass silk are available, with a standard length of 2 m.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e thermocouple, insulated in metal oxide. The operating range for Type J is from \u003cstrong\u003e-200 … +700 °C\u003c\/strong\u003e, for Type K from \u003cstrong\u003e-200 … +1000 °C\u003c\/strong\u003e. The limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e: \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e in the range -40 … 375 °C, above that \u003cstrong\u003e±0.004|t|\u003c\/strong\u003e. The sensor directly outputs the thermovoltage; a transmitter is not documented; the insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The operating range is determined by the cable, not the sensor – PVC ends at \u003cstrong\u003e+70 °C\u003c\/strong\u003e, silicone at \u003cstrong\u003e+180 °C\u003c\/strong\u003e, PTFE at \u003cstrong\u003e+250 °C\u003c\/strong\u003e, glass silk at \u003cstrong\u003e+550 °C\u003c\/strong\u003e. If you want to utilize the +1000 °C of Type K, you will not find a suitable cable in this cable range; for PTFE, the sister sheets specify \u003cstrong\u003e+205 °C\u003c\/strong\u003e, the value from this source is adopted. IP 65 does not apply to the version with braided shield; the source does not specify which protection class applies there. The accuracy table extends further than the operating range: Type J is listed there up to 750 °C, in the operating range up to 700 °C. Terminal assignment, process connection, system pressure, weight, CE mark and explosion protection are not documented. Every order code begins with the product identifier \u003cstrong\u003eKB\u003c\/strong\u003e, the temperature range used must be specified in °C. The version with GL type approval is the \u003cstrong\u003eTBMB\u003c\/strong\u003e (TE-MK1G).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eThermocouple Type J or Type K, -200 … +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLimit deviation Class 1 according to DIN EN 60584-2, ±1.5 °C from -40 °C\u003c\/li\u003e\n\n\u003cli\u003eFlexible sheathed tube, bending radius min. 5 × Ø protection tube\u003c\/li\u003e\n\n\u003cli\u003eFour diameters 1.5 · 3 · 4.5 · 6 mm, nominal length up to 2000 mm\u003c\/li\u003e\n\n\u003cli\u003eResponse time for Ø 3 mm t90 5 s and t50 2 s\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 2.4816 (Inconel 600), material up to 1100 °C\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TBMB (TE-MK1G)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927435078,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TBMA_produkt_7a556a40-7d2f-4373-b0af-e6c840b05785.webp?v=1789243658"},{"product_id":"tkmd-widerstandsthermometer-mit-anschlusskopf-b-gl-wt-mr1g","title":"TKMD Resistance Thermometer with Connection Head B GL (WT-MR1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTKMD\u003c\/strong\u003e is a resistance thermometer with connection head B in the version with GL type approval, manufacturer type Müller \u003cstrong\u003eWT-MR1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for fixed plant installation at measuring points where type approval is required: The manufacturer's data sheet shows the GL mark with the number \u003cstrong\u003eTAA00002H5\u003c\/strong\u003e. The aluminum \u003cstrong\u003econnection head\u003c\/strong\u003e accommodates a ceramic base with connection posts, the process connection at the head is \u003cstrong\u003eM24x1.5\u003c\/strong\u003e, the cable entry is \u003cstrong\u003eM20x1.5\u003c\/strong\u003e, and the protection class is \u003cstrong\u003eIP 54\u003c\/strong\u003e. The protection tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e or \u003cstrong\u003e1.4401 (316)\u003c\/strong\u003e withstands \u003cstrong\u003eup to 600 °C\u003c\/strong\u003e, the process pressure is \u003cstrong\u003emax. PN16\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCompared to the TKMC, this is not the same product with an additional mark: This version is limited to a length of \u003cstrong\u003e200 mm\u003c\/strong\u003e instead of 2000 mm and has a different sheath material and accessory kit. The source does not list a transmitter as an accessory here, but it does include connection cables up to 6 m, compression fittings, and sheet metal flanges. Screw-in (ES) and immersion (ET) designs are available, as well as protection tube diameters of \u003cstrong\u003e3 to 15 mm\u003c\/strong\u003e; the selection is limited for the sheathed element and in the immersion design.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in a \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e, as a standard element or as a sheathed element. The sensor's operating range is \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, and the accuracy ranges in five steps from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. The resistance is at the ceramic base in the head, the test voltage is \u003cstrong\u003e500 VDC\u003c\/strong\u003e, and the response time on the 3×0.4 mm tube is \u003cstrong\u003et90 5 s\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The approval is documented by a mark and number, not by a certificate – the manufacturer's data sheet does not name a certifying body, and the certificate is not available. The language versions contradict each other regarding the sheath material: The English page names 2.4816 (Inconel 600), while the German page and the order codes in both languages name \u003cstrong\u003e1.4401 (316)\u003c\/strong\u003e – 1.4401 applies here. A response time is missing for the other tube geometries. The ambient temperature is not the medium temperature: The head is limited to \u003cstrong\u003e480 °C\u003c\/strong\u003e, the element ends at \u003cstrong\u003e450 °C\u003c\/strong\u003e. IP 54 only applies to the connection head; the source does not specify a standard for the accuracy classes, and terminal assignment, CE mark, and explosion protection are missing. Both carry the product identification \u003cstrong\u003eKD\u003c\/strong\u003e, distinguished only by the first digit: \u003cstrong\u003e4 ... 7\u003c\/strong\u003e for the TKMD, 0 ... 3 for the \u003cstrong\u003eTKMC\u003c\/strong\u003e (WT-MR1) – the latter up to 2000 mm long and sheathed with 2.4816.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H5, documented by mark and number\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, 2-, 3- or 4-wire circuit\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProcess pressure max. PN16, installation lengths 50 to 200 mm\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 1.4571 or 1.4401, Ø 3 to 15 mm, up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eConnection head B made of aluminum, IP 54, cable entry M20x1.5\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL available as TKMC up to 2000 mm length\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927467846,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TKMD_produkt_15586a12-ad89-4b0e-91b8-0781eec53f71.webp?v=1789243717"},{"product_id":"tcme-kabelfuhler-mit-passstuck-wt-kh","title":"TCME Cable Sensor with Adapter (WT-KH)","description":"\u003cp\u003eThe \u003cstrong\u003eTCME\u003c\/strong\u003e is a resistance thermometer designed as a cable sensor with a fitting, manufacturer type Müller \u003cstrong\u003eWT-KH\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures where a mounting bore already exists: The \u003cstrong\u003efitting\u003c\/strong\u003e, a potted sleeve made of \u003cstrong\u003e1.4571\u003c\/strong\u003e, sits on the protective tube and guides the sensor precisely into the bore – no thread or flange is needed for this. You specify the diameter and length of the fitting, allowing the same sensor to fit an existing mounting. The protective tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e and is available in \u003cstrong\u003eØ 4, 5, or 6 mm\u003c\/strong\u003e, with nominal lengths between 25 and 65 mm, or up to \u003cstrong\u003e2000 mm\u003c\/strong\u003e upon request. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt does not have a terminal compartment or electronics: The resistance value is directly available at open, bare ends of 70 mm, and the cable leads directly to the evaluation without an intermediate stage. A transmitter is not documented, therefore no current signal and no power supply either.\u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3- or 4-wire circuit\u003c\/strong\u003e and without insulation material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, and the accuracy can be ordered in five grades from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. For insulation, the manufacturer specifies a \u003cstrong\u003etest voltage of 500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The fitting is not a documented sealing element – the data sheet does not specify system pressure, sealing effect, or installation tolerance; anyone wishing to seal against a medium with it will need written confirmation. The operating range is determined by the cable, not the sensor: PVC only withstands \u003cstrong\u003e-5 ... +70 °C\u003c\/strong\u003e, glass fiber \u003cstrong\u003e-60 ... +550 °C\u003c\/strong\u003e – and the cable is in an environment that is not the medium temperature. \u003cstrong\u003eIP 65 does not apply to the version with screen braiding\u003c\/strong\u003e; what applies there is not stated in the sheet. The nominal length for Ø 4 mm is stated twice differently in the manufacturer's sheet, with 25 and with 35 mm; \u003cstrong\u003e25 mm\u003c\/strong\u003e has been adopted – please specify the length in plain text, as well as the temperature range in °C. The source does not specify a standard for the accuracy classes; CE marks and explosion protection are not documented, and this version does not carry a type approval – the version with \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e is the \u003cstrong\u003eTCMF\u003c\/strong\u003e (WT-KHG). Both carry the product identification \u003cstrong\u003eKV\u003c\/strong\u003e and are distinguished solely by the \"sensor element\" location: 0 ... 3 is the WT-KH, 4 ... 7 is the WT-KHG.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFitting as a potted sleeve made of 1.4571, dimensions as specified\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, 2-, 3- or 4-wire circuit\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, up to 2000 mm upon request\u003c\/li\u003e\n\n\u003cli\u003eFive cable constructions from PVC to glass fiber, -5 ... +550 °C\u003c\/li\u003e\n\n\u003cli\u003eIP 65 up to 250 °C, not with screen braiding\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TCMF (WT-KHG)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927631686,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCME_produkt_4115078f-819b-4be9-825b-82c9c45b783f.webp?v=1789243684"},{"product_id":"tbmb-mantel-thermoelement-gl-te-mk1g","title":"TBMB Sheathed Thermocouple GL (TE-MK1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTBMB\u003c\/strong\u003e is a sheathed thermocouple with GL type approval, manufacturer type Müller \u003cstrong\u003eTE-MK1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for systems where the sensor must have type approval from Germanischer Lloyd: \u003cstrong\u003eGL TAA00002H3\u003c\/strong\u003e. Technically, it is the sensor of the \u003cstrong\u003eTE-MK1\u003c\/strong\u003e, but more narrowly defined – the nominal length is limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e, and the connection cable to \u003cstrong\u003e6 m\u003c\/strong\u003e. The sheath remains flexible with a minimum bending radius of \u003cstrong\u003e5 × Ø protection tube\u003c\/strong\u003e, reaching installation locations that a rigid protection tube cannot; the cable is firmly attached to the sensor, eliminating the need for a connection head. Protection tube \u003cstrong\u003e2.4816\u003c\/strong\u003e (Inconel 600) and connection sleeve \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) provide \u003cstrong\u003eIP 65\u003c\/strong\u003e up to \u003cstrong\u003e250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDiameters and wall thicknesses are specified as \u003cstrong\u003e1.9×0.2\u003c\/strong\u003e, \u003cstrong\u003e3×0.25\u003c\/strong\u003e, \u003cstrong\u003e4.5×0.36\u003c\/strong\u003e, and \u003cstrong\u003e6×0.51 mm\u003c\/strong\u003e, with a standard nominal length of \u003cstrong\u003e100 mm\u003c\/strong\u003e. Connection is made via open ends or via TE connectors in standard or mini form; five cable types from PVC to glass fiber are available. Clamp fittings and sheet metal flanges from the accessories are used for fastening.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a thermocouple \u003cstrong\u003eType J (Fe-CuNi)\u003c\/strong\u003e or \u003cstrong\u003eType K (NiCr-Ni)\u003c\/strong\u003e, insulated in metal oxide. The operating range for Type J is from \u003cstrong\u003e-200 … +700 °C\u003c\/strong\u003e, and for Type K from \u003cstrong\u003e-200 … +1000 °C\u003c\/strong\u003e. The limit deviation follows \u003cstrong\u003eDIN EN 60584-2 Class 1\u003c\/strong\u003e: \u003cstrong\u003e±1.5 °C\u003c\/strong\u003e in the range -40 … 375 °C, and above that \u003cstrong\u003e±0.004|t|\u003c\/strong\u003e. The sensor outputs the thermovoltage directly; a transmitter is not documented; the insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval is proven by a mark and number, not by a certificate; the certificate should be requested before any assurance is given to the classification society. Both versions carry the product designation \u003cstrong\u003eKB\u003c\/strong\u003e; they are distinguished solely by the thermocouple type digit: \u003cstrong\u003e2 · 3\u003c\/strong\u003e is the TE-MK1G, \u003cstrong\u003e0 · 1\u003c\/strong\u003e is the TE-MK1 – a digit swap orders the sensor without approval. The operating range is determined by the cable, not the sensor: PVC ends at +70 °C, silicone at +180 °C, PTFE at +250 °C, glass fiber at +550 °C; for PTFE, the sister sheets state +205 °C. IP 65 does not apply to the version with braided shield. Terminal assignment, process connection, system pressure, weight, response time, CE mark, and explosion protection are not documented. The version without approval, with a nominal length of \u003cstrong\u003e2000 mm\u003c\/strong\u003e, is the \u003cstrong\u003eTBMA\u003c\/strong\u003e (TE-MK1).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eType approval GL TAA00002H3 proven by mark and number\u003c\/li\u003e\n\n\u003cli\u003eThermocouple Type J or Type K, -200 … +1000 °C\u003c\/li\u003e\n\n\u003cli\u003eLimit deviation Class 1 according to DIN EN 60584-2, ±1.5 °C from -40 °C\u003c\/li\u003e\n\n\u003cli\u003eFlexible sheath, bending radius min. 5 × Ø protection tube\u003c\/li\u003e\n\n\u003cli\u003eFour diameters with wall thickness: 1.9×0.2 to 6×0.51 mm\u003c\/li\u003e\n\n\u003cli\u003eNominal length 100 mm as standard, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 2.4816 (Inconel 600), connection cable maximum 6 m\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927729990,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TBMB_produkt_38995495-5526-44d4-9bde-7f3262e5d4e4.webp?v=1789243659"},{"product_id":"temb-einschraub-temperatursensor-pt100-mets-ws","title":"TEMB Screw-in Temperature Sensor Pt100 (METS-WS)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMB\u003c\/strong\u003e is a screw-in temperature sensor with Pt100, measuring amplifier, display, and two limit contacts, manufacturer type Müller \u003cstrong\u003eMETS-WS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is screwed directly into pipes, tanks or units and measures, displays, and switches, without additional electronics in the control cabinet – one device at the process, one signal to the control system, one value to read on site. The protective tube is made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e in standard dimensions Ø 6 × 0.5 mm; with \u003cstrong\u003ePN 25\u003c\/strong\u003e, at least \u003cstrong\u003eIP 65\u003c\/strong\u003e and potted circuit boards, the device weighs approximately \u003cstrong\u003e150 g\u003c\/strong\u003e, and the mounting position is arbitrary.\u003c\/p\u003e\n\u003cp\u003eThe measured value remains readable on site: The display is 4-digit, 8.5 mm high and red, \u003cstrong\u003ereversible by 180°\u003c\/strong\u003e, the head is \u003cstrong\u003erotatable by 330°\u003c\/strong\u003e. Operation is via \u003cstrong\u003ethree buttons (TouchM)\u003c\/strong\u003e. The \u003cstrong\u003etwo limit contacts\u003c\/strong\u003e operate as PNP or NPN with 30 VDC \/ 200 mA, optionally 1000 mA; switching delay and failsafe are adjustable from 0.0 … 999.9 s.\u003c\/p\u003e\n\u003cp\u003eMeasurement is performed with a \u003cstrong\u003ePt100 in 4-wire connection\u003c\/strong\u003e in class A, B or AA (B1\/3 DIN) in the range \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e with a minimum span of 50 °C. The output is \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e in the 2-wire current loop; the accuracy is \u003cstrong\u003emax. 0.1 % of the measuring range\u003c\/strong\u003e plus sensor error at 24 bit resolution. The sensor is powered with \u003cstrong\u003e12 … 35 VDC from the current loop\u003c\/strong\u003e, reverse polarity protected and short-circuit proof.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium may be up to +200 °C warm, but the electronics in the head can only tolerate -40 … +85 °C; the manufacturer explicitly states for the series that temperatures above +85 °C can destroy the electronics. Two limit contacts are not available on every connector, but only on M12 five- and eight-pin, on MIL, and on the cable. Higher ranges up to 250 °C are only mentioned in the data sheet upon request. An admissible load of the current loop is not documented in the manufacturer's data sheet; if planning long lines, the value must be inquired there. For programming, the configurator \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e with TrComm software is required. A CE mark is not documented in the manufacturer's data sheet, and a declaration of conformity is not available. Explosion protection is also not documented for this version; the Ex version is the \u003cstrong\u003eTEMD\u003c\/strong\u003e (METS-WTEx).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eMeasures, displays, and switches – one device directly at the process\u003c\/li\u003e\n\n\u003cli\u003ePt100 in 4-wire connection, class A, B or AA (B1\/3 DIN)\u003c\/li\u003e\n\n\u003cli\u003eMedium -50 … +200 °C, accuracy max. 0.1 % of the measuring range\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA in the 2-wire loop, 12 … 35 VDC from the loop\u003c\/li\u003e\n\n\u003cli\u003eDisplay 4-digit, reversible by 180°, head rotatable by 330°\u003c\/li\u003e\n\n\u003cli\u003eTwo limit contacts, PNP or NPN, 30 VDC \/ 200 mA\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571, system pressure PN 25, at least IP 65\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356927795526,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMB_produkt_438e052b-090e-4e49-80cd-c78da69aa64b.webp?v=1789243685"},{"product_id":"tcmf-kabelfuhler-mit-passstuck-gl-wt-khg","title":"TCMF Cable Sensor with Adaptor GL (WT-KHG)","description":"\u003cp\u003eThe \u003cstrong\u003eTCMF\u003c\/strong\u003e is a cable sensor with a fitting piece in the GL type-approved version, manufacturer type Müller \u003cstrong\u003eWT-KHG\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures where a mounting bore is already present and type approval is also required: The \u003cstrong\u003efitting piece\u003c\/strong\u003e, a cast sleeve made of \u003cstrong\u003e1.4571\u003c\/strong\u003e, sits on the protective tube and guides the sensor precisely into the bore – a thread or a flange is not necessary for this; you specify the diameter and length. The protective tube made of \u003cstrong\u003e1.4571 (316Ti)\u003c\/strong\u003e is approved up to \u003cstrong\u003e600 °C\u003c\/strong\u003e and is available in \u003cstrong\u003eØ 4, 5, or 6 mm\u003c\/strong\u003e; the nominal lengths are between 25 and 65 mm. The protection class is \u003cstrong\u003eIP 65 up to 250 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt differs from the TCME by its type approval: The manufacturer's sheet shows the GL mark with the number \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e. For this, this version is shorter – the maximum length is \u003cstrong\u003e200 mm\u003c\/strong\u003e instead of 2000 mm, and the cable is at most \u003cstrong\u003e6 m\u003c\/strong\u003e. It also does not have a terminal compartment or electronics: The resistance value is directly at open, bare ends of 70 mm; a transmitter is not documented. \u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, in \u003cstrong\u003e2-, 3-, or 4-wire configuration\u003c\/strong\u003e and without insulating material. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e; the accuracy can be ordered in five stages from \u003cstrong\u003eClass A to B1\/10DIN\u003c\/strong\u003e. For insulation, the manufacturer specifies a \u003cstrong\u003etest voltage of 500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval is documented as a mark and number, not as a certificate – the manufacturer's sheet does not name a certifying body, and we do not have the certificate itself; it should be requested before making an assurance to a classification society. The fitting piece is not a documented sealing element: The datasheet does not specify system pressure, sealing effect, or installation tolerance. The operating range is determined by the cable, not the sensor – PVC only withstands \u003cstrong\u003e-5 ... +70 °C\u003c\/strong\u003e, glass fiber \u003cstrong\u003e-60 ... +550 °C\u003c\/strong\u003e, and the cable is in the environment, which is not the medium temperature. Terminal assignment is not documented, neither wire color nor terminal number. The source does not specify a standard for the accuracy classes; CE mark and explosion protection are not documented. Both versions carry the product identification \u003cstrong\u003eKV\u003c\/strong\u003e and are distinguished solely by the \"sensor element\" location: 4 ... 7 is the WT-KHG, 0 ... 3 is the WT-KH.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGL type approval TAA00002H5 documented in the manufacturer's sheet\u003c\/li\u003e\n\n\u003cli\u003eFitting piece as a cast sleeve made of 1.4571, dimensions according to specification\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, 2-, 3- or 4-wire configuration\u003c\/li\u003e\n\n\u003cli\u003eOperating range -200 ... +450 °C, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4571 (316Ti), Ø 4, 5 or 6 mm, maximum nominal length 200 mm\u003c\/li\u003e\n\n\u003cli\u003eCable in standard 2 m, maximum 6 m\u003c\/li\u003e\n\n\u003cli\u003eVersion without GL available up to 2000 mm as TCME (WT-KH)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928155974,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TCMF_produkt_7c87b86b-2304-44d6-bb0d-0da994943bf3.webp?v=1789243684"},{"product_id":"temc-einschraub-temperatursensor-hart-mets-wt","title":"TEMC Screw-in Temperature Sensor HART (METS-WT)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMC\u003c\/strong\u003e is a screw-in temperature sensor with Pt100 and a HART-enabled measuring transducer, manufacturer type Müller \u003cstrong\u003eMETS-WT\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is screwed directly into the pipe, tank or unit and measures where the temperature originates. The thermowell is made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e with standard dimensions Ø 6 × 0.5 mm, the housing body is made of PBT GF30; with \u003cstrong\u003ePN 25\u003c\/strong\u003e, at least \u003cstrong\u003eIP 65\u003c\/strong\u003e and encapsulated circuit boards, the device can be mounted in any position on the process, a 100 mm neck tube is available as an option.\u003c\/p\u003e\n\u003cp\u003eIt is the slim version of the series: no display, no buttons, no limit value contacts. It is intended for systems where the evaluation is done in the control room anyway and only measurement and transmission take place at the process. The electrical connection is on the side, optionally on the top – this determines the space next to the process connection.\u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100 in a 2-wire circuit\u003c\/strong\u003e in Class A, B or AA (B1\/3 DIN) in the range \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e with a minimum span of 50 °C. The output is \u003cstrong\u003e4 … 20 mA with superimposed HART signal\u003c\/strong\u003e in the 2-wire current loop, temperature-linear; the accuracy is \u003cstrong\u003e0.3 % of the range\u003c\/strong\u003e at 16 bit resolution, the measurement rate is 10 measurements per second. The sensor is supplied with \u003cstrong\u003e12 … 40 VDC from the current loop\u003c\/strong\u003e, with reverse polarity protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium may be up to +200 °C, the electronics in the head only -20 … +80 °C. The manufacturer's note states +85 °C, the characteristic values of this sheet only +80 °C; the lower value should be used for design. Without the configurator, this product cannot be adjusted: it has neither display nor buttons, any change to the measuring range requires the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e and the TrComm software. A permissible burden of the current loop is not documented in the manufacturer's data sheet – for HART in long cables, the value should be requested there. Higher ranges are not mentioned in this data sheet. A CE mark is not documented in the manufacturer's data sheet, a declaration of conformity is not available. Explosion protection is not documented; the Ex version is the \u003cstrong\u003eTEMD\u003c\/strong\u003e (METS-WTEx), the version with display and two limit value contacts is the \u003cstrong\u003eTEMB\u003c\/strong\u003e (METS-WS).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePt100 in 2-wire circuit, Class A, B or AA (B1\/3 DIN)\u003c\/li\u003e\n\n\u003cli\u003eMedium -50 … +200 °C, minimum span 50 °C\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA with superimposed HART in the 2-wire loop\u003c\/li\u003e\n\n\u003cli\u003eAccuracy 0.3 % of range, 16 bit, 10 measurements per second\u003c\/li\u003e\n\n\u003cli\u003eSupply 12 … 40 VDC from the loop, with reverse polarity protection\u003c\/li\u003e\n\n\u003cli\u003eElectrical connection optionally lateral or top\u003c\/li\u003e\n\n\u003cli\u003eThermowell 1.4571, system pressure PN 25, at least IP 65\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928254278,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMC_produkt_b35d1c31-6caf-4569-a05f-42e01f25278c.webp?v=1789243685"},{"product_id":"tbmc-mantel-widerstandsthermometer-wt-mk1","title":"TBMC Sheath Resistance Thermometer (WT-MK1)","description":"\u003cp\u003eThe \u003cstrong\u003eTBMC\u003c\/strong\u003e is a sheathed resistance thermometer with a flexible protective tube and fixed connection cable, manufacturer type Müller \u003cstrong\u003eWT-MK1\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures in installation locations that a rigid protective tube cannot reach, and where a class better than a thermocouple is required. The sheathed tube can be bent to a radius of \u003cstrong\u003emin. 5 × Ø protective tube\u003c\/strong\u003e; the cable is firmly attached to the sensor, eliminating the need for a connection head. Protective tube \u003cstrong\u003e1.4401\u003c\/strong\u003e (316), specified as a material up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, and connecting sleeve \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) provide \u003cstrong\u003eIP 65\u003c\/strong\u003e up to \u003cstrong\u003e250 °C\u003c\/strong\u003e. Available in \u003cstrong\u003e3 · 4.5 · 6 mm\u003c\/strong\u003e diameters with a wall thickness of 0.25 to 0.51 mm, the standard nominal length is \u003cstrong\u003e100 mm\u003c\/strong\u003e, up to \u003cstrong\u003e2000 mm\u003c\/strong\u003e on request. Compression fittings and sheet metal flanges are available as accessories.\u003c\/p\u003e\n\u003cp\u003eThe sensor is sluggish: for \u003cstrong\u003e6×0.5 mm\u003c\/strong\u003e, the manufacturer states \u003cstrong\u003et90 30.9 s\u003c\/strong\u003e and t50 12 s; for \u003cstrong\u003e6×1 mm\u003c\/strong\u003e, \u003cstrong\u003et90 22.1 s\u003c\/strong\u003e and t50 7.6 s. Connection is via open ends with wire end ferrules; five cable types from PVC to glass silk are available.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, insulated in metal oxide and wired in \u003cstrong\u003e2-, 3- or 4-wire\u003c\/strong\u003e configuration. The sensor's operating range extends from \u003cstrong\u003e-200 ... +450 °C\u003c\/strong\u003e, with accuracy selectable in five stages from \u003cstrong\u003eClass A\u003c\/strong\u003e to \u003cstrong\u003eB1\/10DIN\u003c\/strong\u003e. The sensor outputs the resistance directly; a transmitter is not documented; insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The operating range is determined by the cable, not the sensor – PVC ends at \u003cstrong\u003e+70 °C\u003c\/strong\u003e, silicone at \u003cstrong\u003e+180 °C\u003c\/strong\u003e, PTFE at \u003cstrong\u003e+205 °C\u003c\/strong\u003e, glass silk at \u003cstrong\u003e+550 °C\u003c\/strong\u003e; only the glass silk version reaches the +450 °C of the sensor. Two four-wire sensors are only available with PTFE-silicone cable, so this version ends at +180 °C. The source does not specify any standard for the accuracy classes – if a class needs to be guaranteed, it must be confirmed by the manufacturer. The two response times contradict each other: the thicker 6×1 mm wall is stated as faster, and 1 mm is not in the wall thickness table. IP 65 does not apply to the version with braided shielding. Terminal assignment, process connection, system pressure, weight, CE mark, and explosion protection are not documented. Each order code begins with the product identifier \u003cstrong\u003eKM\u003c\/strong\u003e, the used temperature range must be specified in °C. The version with GL type approval is the \u003cstrong\u003eTBMD\u003c\/strong\u003e (WT-MK1G).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, -200 ... +450 °C\u003c\/li\u003e\n\n\u003cli\u003eWiring in 2-, 3- or 4-wire freely selectable\u003c\/li\u003e\n\n\u003cli\u003eFive accuracy classes from Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eFlexible sheathed tube, bending radius min. 5 × Ø protective tube\u003c\/li\u003e\n\n\u003cli\u003eThree diameters 3 · 4.5 · 6 mm, nominal length up to 2000 mm\u003c\/li\u003e\n\n\u003cli\u003eProtective tube 1.4401 (316), material up to 600 °C\u003c\/li\u003e\n\n\u003cli\u003eGL version available as TBMD (WT-MK1G)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928319814,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TBMC_produkt_72d26594-15bb-4ddd-b26c-1ce689988940.webp?v=1789243659"},{"product_id":"temd-einschraub-temperatursensor-ex-mets-wtex","title":"TEMD Screw-in Temperature Sensor Ex (METS-WTEx)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMD\u003c\/strong\u003e is a screw-in temperature sensor in an intrinsically safe design, manufacturer type Müller \u003cstrong\u003eMETS-WTEx\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the Ex version of the series and is designed for installation in potentially explosive areas with gases. It is screwed directly into pipes, tanks, or units; the protective tube is made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the system pressure is \u003cstrong\u003ePN 25\u003c\/strong\u003e, and the protection class is at least \u003cstrong\u003eIP 65\u003c\/strong\u003e. Compared to the other screw-in sensors in the series, it goes significantly higher in the medium: up to \u003cstrong\u003e+425 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt has no display, buttons, or limit contacts; the measured value is sent as a current or voltage signal for evaluation, and settings are made with the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e configurator and TrComm software.\u003c\/p\u003e\n\u003cp\u003eMeasurements are taken with a \u003cstrong\u003ePt100 in a 2-wire circuit\u003c\/strong\u003e in Class A, B, or AA in the range of \u003cstrong\u003e-50 … +425 °C\u003c\/strong\u003e with a minimum span of 50 °C. The output offers a choice between \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e in 2-wire technology and \u003cstrong\u003evoltage signals such as 0 … 10 V\u003c\/strong\u003e in 3-wire technology. The accuracy is \u003cstrong\u003emax. 0.1 % of the measuring range\u003c\/strong\u003e plus sensor error at 24-bit resolution, powered by \u003cstrong\u003e12 … 30 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The data sheet specifies installation for gases in \u003cstrong\u003eZone 0, Zone 1, and Zone 2\u003c\/strong\u003e and lists three markings: \u003cstrong\u003eII 1 G Ex ia IIC T6..T1 Ga\u003c\/strong\u003e, \u003cstrong\u003eII 1\/2 G Ex ia IIC T6..T1 Ga\/Gb\u003c\/strong\u003e, and \u003cstrong\u003eII 2 G Ex ia IIC T6..T1 Gb\u003c\/strong\u003e; it does not explicitly state which marking is assigned to which zone. The certifications are \u003cstrong\u003eTÜV 21 ATEX 201293 X\u003c\/strong\u003e according to directive \u003cstrong\u003e2014\/34\/EU\u003c\/strong\u003e and \u003cstrong\u003eIECEx TUN 21.0005X\u003c\/strong\u003e. Both approval numbers end in X, which means special conditions apply; these are found in the operating instructions and not in the data sheet. The temperature class is given as T6..T1, not as a single value; according to the data sheet, the applicable class depends on the installation. The ambient temperature depends on the output type: -20 … +75 °C is permissible for the 2-wire current output, but only -20 … +50 °C for the 3-wire voltage output – anyone who orders the voltage output and designs for the upper value will be 25 K too high. And the ambient temperature is not the medium temperature: The medium can be up to +425 °C, but the electronics in the head cannot – above +85 °C, they can be destroyed. A CE mark is not documented in the data sheet, and a declaration of conformity is not available. The version without explosion protection, with display and two limit contacts, is the \u003cstrong\u003eTEMB\u003c\/strong\u003e (METS-WS).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eIntrinsically safe, marking II 1 G Ex ia IIC T6..T1 Ga\u003c\/li\u003e\n\n\u003cli\u003eATEX TÜV 21 ATEX 201293 X and IECEx TUN 21.0005X\u003c\/li\u003e\n\n\u003cli\u003eInstallation for gases in Zone 0, Zone 1, and Zone 2\u003c\/li\u003e\n\n\u003cli\u003ePt100 in 2-wire circuit, medium -50 … +425 °C\u003c\/li\u003e\n\n\u003cli\u003eAccuracy max. 0.1 % of measuring range, 24-bit resolution\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA in 2-wire or 0 … 10 V in 3-wire technology\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928418118,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TEMD_produkt_f90bbf88-8064-40a9-86cc-c3af619fcca9.webp?v=1789243685"},{"product_id":"tbmd-mantel-widerstandsthermometer-gl-wt-mk1g","title":"TBMD Sheathed Resistance Thermometer GL (WT-MK1G)","description":"\u003cp\u003eThe \u003cstrong\u003eTBMD\u003c\/strong\u003e is a sheathed resistance thermometer with GL type approval, manufacturer type Müller \u003cstrong\u003eWT-MK1G\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for systems where the sensor must carry a type approval from Germanischer Lloyd: \u003cstrong\u003eGL TAA00002H5\u003c\/strong\u003e. Compared to the \u003cstrong\u003eWT-MK1\u003c\/strong\u003e, the nominal length is limited to \u003cstrong\u003e200 mm\u003c\/strong\u003e and the connection cable to \u003cstrong\u003e6 m\u003c\/strong\u003e, but there is an additional diameter of \u003cstrong\u003e1.9 mm\u003c\/strong\u003e, which also fits into narrow boreholes. The sheath remains flexible with a minimum bending radius of \u003cstrong\u003e5 × Ø protection tube\u003c\/strong\u003e and reaches installation locations that a rigid protection tube cannot; the cable is fixed, and no connection head is required.\u003c\/p\u003e\n\u003cp\u003eProtection tube \u003cstrong\u003e1.4401\u003c\/strong\u003e (316), specified as a material up to \u003cstrong\u003e600 °C\u003c\/strong\u003e, and connection sleeve \u003cstrong\u003e1.4571\u003c\/strong\u003e (316Ti) carry \u003cstrong\u003eIP 65\u003c\/strong\u003e up to \u003cstrong\u003e250 °C\u003c\/strong\u003e; the nominal length is standard at \u003cstrong\u003e100 mm\u003c\/strong\u003e. Connection is made via open ends with wire end ferrules; five cable versions from PVC to glass silk are available. Compression fittings and sheet metal flanges are accessories.\u003c\/p\u003e\n\u003cp\u003eThe measuring element is a \u003cstrong\u003ePt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, single or double, insulated in metal oxide and wired in \u003cstrong\u003e2-, 3- or 4-wire\u003c\/strong\u003e circuitry. The sensor's operating range extends from \u003cstrong\u003e-200 to +450 °C\u003c\/strong\u003e, and accuracy can be selected in five steps from \u003cstrong\u003eClass A\u003c\/strong\u003e to \u003cstrong\u003eB1\/10DIN\u003c\/strong\u003e. The sensor outputs resistance directly; a transmitter is not documented; insulation is tested with \u003cstrong\u003e500 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The approval is documented as a mark and number, not as a certificate; the certificate should be requested before any assurance is given to the classification society. Both versions bear the product identification \u003cstrong\u003eKM\u003c\/strong\u003e; they are distinguished solely by the sensor element position: \u003cstrong\u003e4 ... 7\u003c\/strong\u003e is the WT-MK1G, \u003cstrong\u003e0 ... 3\u003c\/strong\u003e is the WT-MK1 - a digit reversal orders the sensor without approval. The operating range is determined by the cable, not the sensor: PVC ends at +70 °C, silicone at +180 °C, PTFE at +205 °C, glass silk at +550 °C - only the glass silk version reaches the sensor's +450 °C. The source does not specify a standard for the accuracy classes. IP 65 does not apply to the version with braided shield. Wall thickness, terminal assignment, process connection, system pressure, weight, response time, CE mark, and explosion protection are not documented. The version without approval, with a nominal length of \u003cstrong\u003e2000 mm\u003c\/strong\u003e, is the \u003cstrong\u003eTBMC\u003c\/strong\u003e (WT-MK1).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eType approval GL TAA00002H5 documented as a mark and number\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000, single or double, -200 ... +450 °C\u003c\/li\u003e\n\n\u003cli\u003eCircuitry in 2-, 3- or 4-wire, Class A to B1\/10DIN\u003c\/li\u003e\n\n\u003cli\u003eFour diameters 1.9 · 3 · 4.5 · 6 mm, one more than the TBMC\u003c\/li\u003e\n\n\u003cli\u003eFlexible sheath, bending radius min. 5 × Ø protection tube\u003c\/li\u003e\n\n\u003cli\u003eNominal length 100 mm as standard, maximum 200 mm\u003c\/li\u003e\n\n\u003cli\u003eProtection tube 1.4401 (316), connection cable maximum 6 m\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356928549190,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TBMD_produkt_9be15878-5282-42b0-bac6-38484c92125f.webp?v=1789243659"},{"product_id":"tpma-kompakt-temperatursensor-mkts","title":"TEME Compact Temperature Sensor (MKTS)","description":"\u003cp\u003eThe \u003cstrong\u003eTEME\u003c\/strong\u003e is a compact screw-in temperature sensor with a programmable transmitter, manufacturer type Müller \u003cstrong\u003eMKTS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt measures where temperature is taken directly in the medium: in pipelines, tanks, hydraulic and cooling circuits. The sensor tube and housing are made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the sensor is potted and protected with \u003cstrong\u003eIP 68\u003c\/strong\u003e, and the system pressure is \u003cstrong\u003emax. 25 bar\u003c\/strong\u003e. At around \u003cstrong\u003e200 g\u003c\/strong\u003e and with a sensor tube of Ø 6 mm, it is small enough for confined installation situations, and the mounting position is arbitrary.\u003c\/p\u003e\n\u003cp\u003eBecause the sensor, output, process connection, and connector can be freely combined, a single design covers a wide variety of systems – from a bare Pt100 directly on the connector to a CANopen node according to CiA 404, from pipe threads to connectors for mobile machines and vehicles (Deutsch DT04, Super Seal, Bayonet, MIL). Instead of stocking a separate device for each signal type and each part of the system, you order the same basic form in the appropriate configuration.\u003c\/p\u003e\n\u003cp\u003eMeasurement is performed with \u003cstrong\u003eone or two Pt100 or Pt1000\u003c\/strong\u003e in the range of \u003cstrong\u003e-50 ... +200 °C\u003c\/strong\u003e with a minimum span of \u003cstrong\u003e50 K\u003c\/strong\u003e. The transmitter operates with 24-bit resolution and an accuracy of \u003cstrong\u003emax. 0.1% of the range\u003c\/strong\u003e plus sensor error; for CANopen, it is ±0.1 K with a 20 ms conversion time. Two measuring elements are only possible in the version without a transmitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium can be up to +200 °C, but the electronics in the head with a transmitter can only tolerate -20 ... +80 °C, and without a transmitter -30 ... +100 °C. The 0.1% only applies between 0 and +40 °C ambient temperature. The CANopen transmitter is calibrated at the factory and cannot be configured afterwards; the analog output can be set with the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e configurator and TrComm software. The MK identifier is used three times by this manufacturer (MKTS, MKTS-GL, MKTS-SP) – please state the type designation in plain text when inquiring. The EC declaration of conformity is available, but it dates from 25.07.2011 and still refers to directives 2004\/108\/EC and 97\/23\/EC, which were replaced in 2016; the datasheet itself does not show a CE mark. Explosion protection is not documented; the intrinsically safe version is the \u003cstrong\u003eTEMG\u003c\/strong\u003e (MKTS-Ex).\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOne design for direct resistance, 4 ... 20 mA, 0 ... 10 V and CANopen\u003c\/li\u003e\n\n\u003cli\u003eMeasuring range -50 to +200 °C, accuracy max. 0.1% of range\u003c\/li\u003e\n\n\u003cli\u003eInstallation length 50 to 1000 mm in 5 mm increments\u003c\/li\u003e\n\n\u003cli\u003eSensor tube and housing made of stainless steel 1.4571, IP 65 \/ IP 68, max. 25 bar\u003c\/li\u003e\n\n\u003cli\u003eConnectors also for mobile machines and vehicles\u003c\/li\u003e\n\n\u003cli\u003eIntrinsically safe version available as TEMG\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356931989830,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPMA_produkt_abeb0373-f63d-4f06-8fa2-4d8d6cebe2b7.webp?v=1789243717"},{"product_id":"tnma-einstech-thermometer-hart-mkts-el","title":"TNMA Penetration Thermometer HART (MKTS-EL)","description":"\u003cp\u003eThe \u003cstrong\u003eTNMA\u003c\/strong\u003e is an immersion thermometer in the form of a handheld lance with HART, manufacturer type Müller \u003cstrong\u003eMKTS-EL\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for mobile use – hay, compost, hot asphalt: The lance is inserted into the material until the tip is deep enough. It is available in lengths from \u003cstrong\u003e500 to 2000 mm\u003c\/strong\u003e and upon request, with \u003cstrong\u003eØ 10 mm\u003c\/strong\u003e made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e. The weight is approximately \u003cstrong\u003e845 g\u003c\/strong\u003e (1000 mm with display), the protection class is \u003cstrong\u003eIP 65 for the electronics and IP 68 for the sensor\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe process connection is explicitly listed in the data sheet as a \u003cstrong\u003ehandheld lance, no installation\u003c\/strong\u003e: There are no threads or sealing surfaces. Readings are taken directly from the handle – the \u003cstrong\u003e7-segment LCD\u003c\/strong\u003e has a resolution of \u003cstrong\u003e0.1 °C\u003c\/strong\u003e, its accuracy is ±1% or 1°C, whichever is greater, and it runs on a \u003cstrong\u003eCR 2032 battery\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAt the input, there is a \u003cstrong\u003ePt100 in 3-wire circuit\u003c\/strong\u003e in classes A, B, and AA, or alternatively a \u003cstrong\u003eType K thermocouple\u003c\/strong\u003e. The maximum range extends from \u003cstrong\u003e-50 ... +400 °C\u003c\/strong\u003e with a smallest span of 50 K. The output is either the \u003cstrong\u003eresistance directly on the connector\u003c\/strong\u003e or \u003cstrong\u003e4 ... 20 mA with HART\u003c\/strong\u003e in the 2-wire loop; the total accuracy via HART is \u003cstrong\u003e0.3% of the range\u003c\/strong\u003e at 16 bit. The transmitter is supplied from the current loop with \u003cstrong\u003e10 ... 35 VDC\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The sensor ranges up to +400 °C, but the factory setting of the transmitter only goes up to +200 °C; if you want to measure higher, you must specify the configuration as custom. The ambient temperature is not the medium temperature: With the transmitter, -20 ... +80 °C is permissible, without the transmitter -30 ... +100 °C, the medium may have -50 ... +400 °C. Supply and burden formula do not match: 10 ... 35 VDC are specified, but the burden formula calculates with UB - 12 V and results in a negative value below 12 V; sister sheets consistently state 12 ... 40 VDC. The source provides no information on the lifespan of the CR 2032 battery or battery regulations. A statement \"system pressure 25 bar\" is on the sheet, but has no discernible meaning for a handheld lance without a process connection – suitability for process pressure is therefore not proven. Super Seal and Deutsch DT04 three-pole only lead one sensor. Configuration is done using the \u003cstrong\u003eHART interface with USB and software\u003c\/strong\u003e (01310-00220). A CE mark, a declaration of conformity, and explosion protection are not documented in the data sheet.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHandheld lance Ø 10 mm in 500 to 2000 mm length – no installation required\u003c\/li\u003e\n\n\u003cli\u003ePt100 in 3-wire circuit or Type K thermocouple\u003c\/li\u003e\n\n\u003cli\u003eMedium -50 ... +400 °C, accuracy 0.3% of range at 16 bit\u003c\/li\u003e\n\n\u003cli\u003e4 ... 20 mA with HART or resistance directly on the connector\u003c\/li\u003e\n\n\u003cli\u003eDisplay on handle with 0.1 °C resolution, CR 2032 battery\u003c\/li\u003e\n\n\u003cli\u003eLance made of stainless steel 1.4571, IP 65 \/ IP 68\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356932514118,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TNMA_produkt_7ddcdd9d-ce9b-4939-8553-8159af3458b3.webp?v=1789243717"},{"product_id":"tpmc-kompaktsensor-eigensicher-mkts-ex","title":"TEMG Compact Sensor Intrinsically Safe (MKTS-Ex)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMG\u003c\/strong\u003e is an intrinsically safe compact temperature sensor for hazardous areas, manufacturer type Müller \u003cstrong\u003eMKTS-Ex\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt covers measuring points in gas-hazardous areas – tanks, separators, pipelines with flammable media – without explosion-proof encapsulation or separating component in the field. The sensor tube, housing body and plug insert are made entirely of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the system pressure is \u003cstrong\u003emax. 25 bar\u003c\/strong\u003e, and the protection class is \u003cstrong\u003eIP 65 \/ IP 68\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt is the intrinsically safe version of the same design platform: same housing, same outputs, plus \u003cstrong\u003eATEX\u003c\/strong\u003e and \u003cstrong\u003eIECEx\u003c\/strong\u003e for Zone 0.\u003c\/p\u003e\u003cp\u003eMeasurement is performed with \u003cstrong\u003eone or two Pt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e, only in \u003cstrong\u003eClass A\u003c\/strong\u003e, at \u003cstrong\u003emax. 0.1 % of the range\u003c\/strong\u003e. The measurement range of the data table extends from \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e, the smallest span is \u003cstrong\u003e50 K\u003c\/strong\u003e; the medium temperature additionally limits the temperature class: \u003cstrong\u003e+425 °C in T1\u003c\/strong\u003e, +275 °C in T2, +180 °C in T3, +115 °C in T4, +80 °C in T5 and \u003cstrong\u003e+65 °C in T6\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering, please note:\u003c\/strong\u003e The marking is \u003cstrong\u003eII 1 G Ex ia IIC T6..T1 Ga\u003c\/strong\u003e, plus II 1\/2 G Ga\/Gb and II 2 G Gb; Zone 0, 1 and 2 are approved for gases. The intrinsically safe maximum values at both outputs are \u003cstrong\u003eUi 30 VDC, Ii 110 mA, Pi 1 W\u003c\/strong\u003e, passive 30 V, 100 mA and 100 mW, with \u003cstrong\u003eCi 66 nF\u003c\/strong\u003e and \u003cstrong\u003eLi 330 µH\u003c\/strong\u003e (330 m cable). Both certificate numbers end with X – \u003cstrong\u003eTÜV 21 ATEX 201293 X\u003c\/strong\u003e and \u003cstrong\u003eIECEx TUN 21.0005X\u003c\/strong\u003e – and include special conditions; the source mentions heat backflow, impact and friction, and electrostatic charging. The permissible ambient temperature depends on the temperature class and the output type: current output -40 … +75 °C, voltage output only -40 … +50 °C, passive -50 … +100 °C; in T5 and T6, the source calculates the limit from the power dissipation, the corresponding table should be read before design. Measurement range and medium temperature contradict each other in the data sheet: feature bar -50 … +200 °C, data table -50 … +425 °C, plus the limit per temperature class – the smallest of the three values applies. Two measuring elements are only available without a transmitter; the installation length (10 … 300 mm) must be specified. The product identification GN also appears verbatim on the MKTS-GLEx sheet; please specify the type designation in plain text. Configuration is done with the \u003cstrong\u003eDEV-KMA\u003c\/strong\u003e and TrComm. The data sheet mentions \u003cstrong\u003e2014\/34\/EU\u003c\/strong\u003e as a guideline; a CE mark is not documented there. The certificates are available on request and for download according to the source, we do not have them. The version with additional marine approval is the \u003cstrong\u003eTEMF\u003c\/strong\u003e (MKTS-GLEx).\u003c\/p\u003e\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eMarking II 1 G Ex ia IIC T6..T1 Ga, Zone 0, 1 and 2 for gases\u003c\/li\u003e\n\n\u003cli\u003eATEX TÜV 21 ATEX 201293 X and IECEx TUN 21.0005X, both with X\u003c\/li\u003e\n\n\u003cli\u003ePt100 or Pt1000 in Class A, max. 0.1 % of the range\u003c\/li\u003e\n\n\u003cli\u003eMedium temperature up to +425 °C in T1, +65 °C in T6\u003c\/li\u003e\n\n\u003cli\u003eUi 30 VDC, Ii 110 mA, Pi 1 W, Ci 66 nF, Li 330 µH\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA, 0…10 V or resistance directly at the connector\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356932546886,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPMC_produkt_f044c3e0-b2af-4bde-9c66-ccac6c918a85.webp?v=1789243717"},{"product_id":"tpme-kompaktsensor-io-link-mkts-io","title":"TEMH Compact Sensor IO-Link (MKTS-IO)","description":"\u003cp\u003eThe \u003cstrong\u003eTEMH\u003c\/strong\u003e is a compact temperature sensor with an IO-Link interface, manufacturer type Müller \u003cstrong\u003eMKTS-IO\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt measures where the temperature is taken directly in the medium – in pipelines, tanks, hydraulic and cooling circuits. The sensor tube Ø 6 mm and housing are made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the electronics are potted (\u003cstrong\u003eIP 65 \/ IP 68\u003c\/strong\u003e), and the system pressure is \u003cstrong\u003emax. 25 bar\u003c\/strong\u003e. The insertion length ranges from 50 to 1000 mm, and the mounting position is arbitrary.\u003c\/p\u003e\u003cp\u003eThe benefit lies in its digital integration: the measured value is sent via \u003cstrong\u003eIO-Link\u003c\/strong\u003e to the master, where the sensor is also parameterized – without a configuration device and without analog wiring; the settable values are described in the device file \u003cstrong\u003eIODD MKTS\u003c\/strong\u003e. As the only one in the series, it also accommodates \u003cstrong\u003etype J, K, and N thermocouples\u003c\/strong\u003e, thereby covering measurement points with existing thermocouple wiring. Electrically, there is exactly one connection, \u003cstrong\u003eM12x1 four-pin\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe input contains \u003cstrong\u003ea Pt100\u003c\/strong\u003e in a \u003cstrong\u003e3-wire circuit\u003c\/strong\u003e in classes A, B, and AA, class C on request, or alternatively a thermocouple. The nominal range for all elements is from \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e. The source states the accuracy as \u003cstrong\u003emax. 0.02 % of the range\u003c\/strong\u003e plus sensor error at \u003cstrong\u003e16 bit\u003c\/strong\u003e and \u003cstrong\u003e20 ms\u003c\/strong\u003e response time; the sensor is powered with \u003cstrong\u003e24 VDC\u003c\/strong\u003e with reverse polarity protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium may be up to +200 °C, but the electronics in the head only tolerate -20 … +80 °C; the source does not state what neck length or insulation is required for this. The accuracy specification contradicts the sister sheets: here, 0.02 % of the range is stated for 16-bit resolution, while the 24-bit versions only guarantee 0.1 % – the better value is on the coarser converter, which needs to be confirmed with the manufacturer before design. Filters and response time also do not match: 25 s filter at 20 ms response time, without explanation in the source. The product identification is not unambiguously documented: the order key has a placeholder in the second position, the product overview lists MX – please specify the type designation in plain text. A CE mark is not documented, and a declaration of conformity is not available; regarding the IO-Link interface, the source names the specification but no version number or test certificate. Explosion protection is not documented.\u003c\/p\u003e\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eIO-Link interface with signal level 0\/24 V, parameterization via the master\u003c\/li\u003e\n\n\u003cli\u003eAs the only one in the series, also type J, K, and N thermocouples\u003c\/li\u003e\n\n\u003cli\u003ePt100 3-wire in classes A, B, and AA\u003c\/li\u003e\n\n\u003cli\u003eNominal range -50 to +200 °C for each element\u003c\/li\u003e\n\n\u003cli\u003eA single M12x1 four-pin connection, no variety of connectors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356933890374,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPME_produkt_41cde47e-8c9e-4325-98c9-99709e30d2df.webp?v=1789243718"},{"product_id":"tpmf-standard-temperatursensor-sts","title":"TPMF Standard Temperature Sensor (STS)","description":"\u003cp\u003eThe \u003cstrong\u003eTPMF\u003c\/strong\u003e is a standard temperature sensor without electronics, manufacturer type Müller \u003cstrong\u003eSTS\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt measures directly in the medium and is installed using a \u003cstrong\u003ecompression fitting G1\/4\" or G1\/2\"\u003c\/strong\u003e. The material throughout is stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the sensor tube measures \u003cstrong\u003eØ 6 × 0.5 mm\u003c\/strong\u003e, the total length is \u003cstrong\u003e163 mm\u003c\/strong\u003e, of which 140 mm is tube, the housing body is completely potted internally, protection class \u003cstrong\u003eIP 67\u003c\/strong\u003e when connected, installation position is arbitrary. At \u003cstrong\u003eapprox. 23 g\u003c\/strong\u003e, it is the lightest in the series and hardly strains the measuring point.\u003c\/p\u003e\u003cp\u003eIt is the basic type of the series and solves a procurement problem, not a metrological one: It has \u003cstrong\u003eno order key, but a single order number 100-02161\u003c\/strong\u003e. Where otherwise ten digits would have to be set correctly – transmitter, number of wires, class, installation length, process connection, connector insert, configuration – there is only one version here.\u003c\/p\u003e\u003cp\u003eThe measuring element is \u003cstrong\u003ea Pt100\u003c\/strong\u003e in a \u003cstrong\u003e4-wire circuit\u003c\/strong\u003e of \u003cstrong\u003eClass A\u003c\/strong\u003e, the measuring range of the medium extends from \u003cstrong\u003e-20 … +150 °C\u003c\/strong\u003e. The sensor is a \u003cstrong\u003epassive measuring element\u003c\/strong\u003e and provides a resistance: The four wires are directly connected to the four pins of the \u003cstrong\u003eM12x1, four-pole, A-coded\u003c\/strong\u003e connector, a transmitter is not present. This means there is nothing to power and nothing to configure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote before ordering:\u003c\/strong\u003e The ambient temperature is not the medium temperature – the medium may be up to +150 °C warm, the head tolerates only -20 … +80 °C, storage -20 … +85 °C; the source does not state what neck length or insulation is required for this, condensation is harmless. The system pressure of \u003cstrong\u003emax. 10 bar\u003c\/strong\u003e is the smallest in this series – the other MKTS versions support 25 bar; the data sheet does not state the reason, but the compression fitting is a plausible explanation. The compression fitting is not included in the scope of delivery and has its own order numbers: G1\/4\" is \u003cstrong\u003e047-00067\u003c\/strong\u003e, G1\/2\" is \u003cstrong\u003e047-00066\u003c\/strong\u003e, steel clamping ring, material stainless steel 1.4571, for Ø 6 mm; the corresponding socket and the six connection cables from the source are also not included. This version does not offer other elements, other classes, or a different number of wires. The source does not specify a standard for Class A. A CE mark is not documented, a declaration of conformity is not available; explosion protection is also not documented.\u003c\/p\u003e\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eA single order number 100-02161, no order key\u003c\/li\u003e\n\n\u003cli\u003ePt100 Class A in 4-wire circuit, passive without power supply\u003c\/li\u003e\n\n\u003cli\u003eMedium -20 to +150 °C, ambient -20 to +80 °C\u003c\/li\u003e\n\n\u003cli\u003eOnly approx. 23 g, total length 163 mm, 140 mm tube\u003c\/li\u003e\n\n\u003cli\u003eM12x1 four-pole A-coded, resistance directly on the pins\u003c\/li\u003e\n\n\u003cli\u003eThroughout stainless steel 1.4571, protection class IP 67, max. 10 bar\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356934218054,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPMF_produkt_3cb47d57-a333-4cf7-af3a-3cf9dec36179.webp?v=1789243718"},{"product_id":"tpmg-hygiene-temperatursensor-hart-mhy-ts","title":"TPMG Hygienic Temperature Sensor HART (MHY-TS)","description":"\u003cp\u003eThe \u003cstrong\u003eTPMG\u003c\/strong\u003e is a compact temperature sensor in a hygienic design with HART, manufacturer type Müller \u003cstrong\u003eMHY-TS\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIt is the hygienic version of the same design platform: The process connection is \u003cstrong\u003eG1\/2\" in a hygienic design\u003c\/strong\u003e or an immersion probe, sensor tube, process connection and housing are continuously made of stainless steel \u003cstrong\u003e1.4571\u003c\/strong\u003e, the connector insert is always metal – plastic is not provided. It is designed for measuring points that are cleaned and where no plastic should be in contact with the medium. The system pressure is \u003cstrong\u003emax. 25 bar\u003c\/strong\u003e, the protection class \u003cstrong\u003eIP 65 \/ IP 68\u003c\/strong\u003e, the installation length 50 to 1000 mm.\u003c\/p\u003e\u003cp\u003eOne design covers several signal types: \u003cstrong\u003e4 … 20 mA with HART\u003c\/strong\u003e in the 2-wire loop, \u003cstrong\u003eCANopen\u003c\/strong\u003e according to CiA 404, or the version without a transmitter with connections directly on the plug. The HART transmitter is set with the \u003cstrong\u003eHART interface with USB and software\u003c\/strong\u003e, order number \u003cstrong\u003e01310-00220\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe input has \u003cstrong\u003eone or two Pt100\u003c\/strong\u003e or \u003cstrong\u003ePt1000\u003c\/strong\u003e in classes A, B, and AA. The measuring range extends from \u003cstrong\u003e-50 … +200 °C\u003c\/strong\u003e, the smallest span is \u003cstrong\u003e50 K\u003c\/strong\u003e. The total accuracy via HART is \u003cstrong\u003e0.3% of the range\u003c\/strong\u003e at \u003cstrong\u003e16 bit\u003c\/strong\u003e resolution and 10 measurements per second, via CANopen at \u003cstrong\u003e±0.1 K\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note before ordering:\u003c\/strong\u003e The datasheet does not mention a hygiene approval. The sheet describes the sensor as hygienic but does not document EHEDG or 3-A, no surface roughness Ra, no information on cleanability, no sealing materials, and no FDA conformity; only material 1.4571 and the G1\/2\" hygienic process connection are confirmed – those who need approval must request it from the manufacturer. The ambient temperature is not the medium temperature: The medium can be up to +200 °C, the electronics in the head tolerate only -20 … +80 °C with a transmitter, and -30 … +100 °C without a transmitter. For CANopen, only the eight-pin connector is suitable because the CAN bus pinout requires five pins – shield, plus, ground, CAN High, and CAN Low. The CANopen transmitter is calibrated at the factory; only the HART transmitter can be adjusted later. When communicating via a HART modem, a resistance of \u003cstrong\u003e250 Ω\u003c\/strong\u003e must be considered. The sheet does not mention a CE mark, a directive, or a declaration of conformity; explosion protection is also not documented.\u003c\/p\u003e\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eProcess connection G1\/2\" hygienic or immersion probe\u003c\/li\u003e\n\n\u003cli\u003eSensor tube, connection and housing continuously made of stainless steel 1.4571\u003c\/li\u003e\n\n\u003cli\u003eConnector insert always metal, no plastic on the device\u003c\/li\u003e\n\n\u003cli\u003e4 … 20 mA with HART or CANopen according to CiA 404\u003c\/li\u003e\n\n\u003cli\u003eTotal accuracy 0.3% of the range at 16 bit, measuring range -50 to +200 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"Default Title","offer_id":57356934775110,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TPMG_produkt_4fda4d2f-f426-4e8b-8bdc-5938eddb5541.webp?v=1789243718"}],"url":"https:\/\/octogon-sensors.com\/en\/collections\/temperatur-einbau-im-prozess.oembed?page=2","provider":"octogon GmbH","version":"1.0","type":"link"}