{"title":"IO-Link sensors and measuring electronics","description":"\u003cp\u003eEvery octogon device that speaks \u003cstrong\u003eIO-Link\u003c\/strong\u003e — in one place. IO-Link is the open standard to IEC 61131-9 for the last few metres between sensor and controller: an unscreened three-wire cable to the master, and the master passes the values on to PROFINET, EtherNet\/IP, EtherCAT or Modbus. The reading arrives digitally, parameters and diagnostics run over the same cable, and when a device is replaced the master writes its settings back by itself.\u003c\/p\u003e\u003cp\u003eTwo routes lead to IO-Link, and you will find both here: \u003ca href=\"\/en\/collections\/io-link-messelektronik\"\u003eIO-Link amplifiers\u003c\/a\u003e convert the signal of an existing strain gauge load cell — in a housing or as an OEM board for your own device. With \u003ca href=\"\/en\/collections\/io-link-waegezellen\"\u003eIO-Link inside the sensor\u003c\/a\u003e the electronics sit in the load cell itself, which saves one device and one connection point.\u003c\/p\u003e\u003cp\u003eWhich route fits your plant is set out on the page \u003ca href=\"\/en\/pages\/io-link\"\u003eIO-Link at a glance\u003c\/a\u003e. Price, data sheet and delivery time are online with every article.\u003c\/p\u003e","products":[{"product_id":"l-tlb-waegetransmitter","title":"Weight transmitter L-TLB","description":"\u003cp\u003e\u003cstrong\u003eWeight transmitters L-TLB\u003c\/strong\u003e serve as an interface between the \u003cstrong\u003eload cell\u003c\/strong\u003e , \u003cstrong\u003eweighing platform\u003c\/strong\u003e or other \u003cstrong\u003estrain gauge sensors\u003c\/strong\u003e and a \u003cstrong\u003ePLC unit\u003c\/strong\u003e in industrial applications. Weighing transmitter indicator with 6-digit red LED display (8 mm digit height). Compact design with space-saving, narrow construction. 4 buttons for system calibration. 6 display LEDs. Dimensions: 25 x 115 x 120 mm.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the L-TLB weight transmitters\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Weighing transmitter for installation on the rear wall of the control panel on\u003cbr\u003e Omega\/DIN rail\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅6-digit semi-alphanumeric red LED display\u003cbr\u003e (8 mm digit height)\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅Serial interface RS485 for communication via protocols\u003cbr\u003e ModBus RTU, ASCII or continuous unidirectional\u003cbr\u003e transmission\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅3 relay outputs controlled with setpoints or via protocols\u003c\/p\u003e\n\u003cp\u003e✅2 opto-isolated digital PNP inputs: status reading via serial\u003cbr\u003e communication protocols\u003c\/p\u003e\n\u003cp\u003e✅1 load cell input\u003c\/p\u003e\n\u003cp\u003e✅The analog output enables the output of:\u003cbr\u003e Current signal: 0...20 mA; 4...20 mA (up to 300 Ohm)\u003cbr\u003e Voltage signal: 0...10 V; 0...5V; ±10V; ±5 V (min 10k Ohm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/L-TLB_Datenblatt.pdf?v=1711463053\" style=\"color: #d84f1b;\" title=\"octogon Shop\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAD model:\u003cbr\u003e \u003ca title=\"octogon Shop\" style=\"color: #d84f1b;\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/TLB.stp?v=1712652129\" target=\"_blank\"\u003eL-TLB\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"4...20mA; 0...10V; ±10V","offer_id":49312646660422,"sku":"","price":220.0,"currency_code":"EUR","in_stock":true},{"title":"Profinet","offer_id":49312646693190,"sku":"","price":418.0,"currency_code":"EUR","in_stock":true},{"title":"EtherCAT","offer_id":49312646725958,"sku":"","price":451.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/ETLG_TLB__product_freigestellt.png?v=1786622909"},{"product_id":"io-link-dms-messverstaerker-epg-io","title":"IO-Link strain gauge amplifier EPG-IO","description":"\u003cp\u003e\u003cstrong\u003eIO-Link strain gauge amplifiers EPG-IO\u003c\/strong\u003e for load cells offer various advantages in industrial applications. The combination of IO-Link and strain gauge amplifiers optimizes \u003cstrong\u003edata acquisition and data transmission\u003c\/strong\u003e in load cell applications, resulting in improved process control and efficiency.\u003c\/p\u003e\n\u003cp\u003eThe strain gauge measuring amplifier has a robust plastic housing and is suitable for a wide range of industrial applications.\u003c\/p\u003e\n\u003cp\u003eThis has a connection for a \u003cstrong\u003estrain gauge full bridge\u003c\/strong\u003e. The sensor signal from the application is converted into a standardized IO-Link signal by the measuring amplifier. The measuring transducer uses its power supply to apply a measuring current to the strain gauge bridge. The output signal of the bridge changes proportionally to the change in force and is passed on by the IO-Link interface as a digital signal.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of the EPG-IO IO-Link strain gauge amplifier\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e✅Input: \u003cstrong\u003e1 DMS full bridge\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Measuring range: freely adjustable in the range -32000...+32000\u003c\/p\u003e\n\u003cp\u003e✅Combined error \u003cstrong\u003e\u0026lt;±0.05%\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Output: \u003cstrong\u003eIO-Link\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e✅Resolution: \u003cstrong\u003e16 bit\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Strain gauge supply: 3 VDC\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e✅Dimensions: 72x28x35 mm (without electrical connection)\u003c\/p\u003e\n\u003cp\u003e✅Protection class: \u003cstrong\u003eat least IP65\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e✅Compatible with other manufacturers\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/IO-Link_DMS_Messverstaerker_EPG-IO.pdf?v=1711460776\" title=\"octogon Shop\" style=\"color: #d84f1b;\"\u003eDatasheet\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"octogon Shop","offers":[{"title":"traction sensor","offer_id":49469983719750,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"pressure force sensor","offer_id":49469983752518,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true},{"title":"tension\/compression force sensor","offer_id":49469983785286,"sku":"","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/IO-Link_EPG-IO.png?v=1713777034"},{"product_id":"lboa-io","title":"LBOA-IO Shear Beam Load Cell with IO-Link","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLBOA-IO\u003c\/strong\u003e is a precise shear and bending beam load cell with an integrated \u003cstrong\u003eIO-Link interface\u003c\/strong\u003e for industrial weighing and force measurement applications. It is suitable for tensile and compressive forces and is available in measuring ranges from \u003cstrong\u003e50 kg to 10,000 kg\u003c\/strong\u003e or optionally from \u003cstrong\u003e500 N to 100 kN\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIn addition to digital measured value transmission via IO-Link, an analog \u003cstrong\u003e4-20 mA signal\u003c\/strong\u003e is available in SIO mode. Configurable switching points enable direct monitoring of limit values.\u003c\/p\u003e\n\u003cp\u003eWith a total error of maximum \u003cstrong\u003e±0.02 % FS\u003c\/strong\u003e, a robust stainless steel housing made of \u003cstrong\u003e17-4PH \/ 1.4542\u003c\/strong\u003e and protection class \u003cstrong\u003eIP67\u003c\/strong\u003e, the load cell is suitable for demanding industrial environments. ISO 17025 calibration is optionally available.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eIO-Link 1.1 and analog 4-20 mA output\u003c\/li\u003e\n\n\u003cli\u003eMeasuring ranges up to 10,000 kg or 100 kN\u003c\/li\u003e\n\n\u003cli\u003eTotal error ≤ ±0.02 % FS\u003c\/li\u003e\n\n\u003cli\u003eFor tensile and compressive force measurements\u003c\/li\u003e\n\n\u003cli\u003eStainless steel housing made of 17-4PH \/ 1.4542\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP67\u003c\/li\u003e\n\n\u003cli\u003eConfigurable switching points\u003c\/li\u003e\n\n\u003cli\u003eOptional with ISO 17025 calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"octogon GmbH","offers":[{"title":"50 kg","offer_id":56755182829894,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"75 kg","offer_id":56755182862662,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"150 kg","offer_id":56755182895430,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"300 kg","offer_id":56755182928198,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"500 kg","offer_id":56755182960966,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"750 kg","offer_id":56755182993734,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"1 t","offer_id":56755183026502,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"1.5 tons","offer_id":56755183059270,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"2 t","offer_id":56755183092038,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"5 t","offer_id":56755183124806,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"7.5 t","offer_id":56755183157574,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"10 t","offer_id":56755183190342,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"500 N","offer_id":56755183223110,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"750 N","offer_id":56755183255878,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"1.5 kN","offer_id":56755183288646,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"3 kN","offer_id":56755183321414,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"5 kN","offer_id":56755183354182,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"7.5 kN","offer_id":56755183386950,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"10 kN","offer_id":56755183419718,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"15 kN","offer_id":56755183452486,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"20 kN","offer_id":56755183485254,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"50 kN","offer_id":56755183518022,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"75 kN","offer_id":56755183550790,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"100 kN","offer_id":56755183583558,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/LBOA-IO.webp?v=1782212964"},{"product_id":"eomc-mcut-e","title":"EOMC IO-Link-Messumformer (MCUT-E)","description":"\u003cp\u003eDer \u003cstrong\u003eEOMC\u003c\/strong\u003e ist ein einkanaliger IO-Link-Messumformer als OEM-Platine, Typ \u003cstrong\u003eMCUT-E\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEr macht aus dem Signal einer DMS-Vollbrücke einen digitalen Messwert – für Kraft und Druck. Der Messbereich ist frei einstellbar und \u003cstrong\u003eeinheitenlos\u003c\/strong\u003e: Die Platine nimmt die Einheit der Anwendung an, ob Newton, Kilogramm oder bar. Weil der Wert über IO-Link geht, sind Konfiguration, Diagnose und Gerätetausch ohne Neuskalierung möglich.\u003c\/p\u003e\n\u003cp\u003eDer Kanal nimmt \u003cstrong\u003e1 × DMS-Vollbrücke\u003c\/strong\u003e ab 350 Ω auf, bei zwei parallelen Vollbrücken mindestens 2 × 700 Ω; weitere Brücken sind möglich, der Mindestwiderstand steigt entsprechend. Die Brückenspeisung liefert \u003cstrong\u003e3 V\u003c\/strong\u003e. Der Messbereich ist im Bereich \u003cstrong\u003e-3200,0 … +3200,0\u003c\/strong\u003e frei einstellbar. Die Auflösung beträgt \u003cstrong\u003e16 bit\u003c\/strong\u003e, die Genauigkeit \u003cstrong\u003emax. 0,05 % vom Messbereich\u003c\/strong\u003e zuzüglich Sensorfehler. Der Filter liegt bei 0,5 s, die Einschaltverzögerung unter 5 s, die Antwortzeit bei \u003cstrong\u003e20 ms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAm Ausgang steht ein \u003cstrong\u003eIO-Link-Interface\u003c\/strong\u003e mit Signalpegel 0 \/ 24 V nach IO-Link-Spezifikation. Versorgt wird die Platine mit \u003cstrong\u003e24 VDC\u003c\/strong\u003e bei unter 30 mA im Standardbetrieb, maximal 130 mA Gesamtstrom; der Schaltstrom im SIO-Modus beträgt maximal 100 mA. Verpolung ist geschützt – keine Funktion, keine Zerstörung.\u003c\/p\u003e\n\u003cp\u003eDie Platine misst \u003cstrong\u003e40 × 17 × 4,5 mm\u003c\/strong\u003e bei etwa 6,5 g, Material FR4 und PBT, Anschluss über Lötpads 2,7 × 1,5 mm, Einbaulage beliebig. Der Arbeitsbereich reicht von \u003cstrong\u003e-20 °C bis +80 °C\u003c\/strong\u003e, die Lagertemperatur von -20 °C bis +85 °C.\u003c\/p\u003e\n\u003cp\u003eFür Konfiguration und Betrieb ist ein \u003cstrong\u003eIO-Link-Master\u003c\/strong\u003e erforderlich, dazu die passende IODD-Datei aus dem IODD-Finder. Die Platine trägt \u003cstrong\u003eIP00\u003c\/strong\u003e und gehört in ein Gehäuse eingebaut. Geprüft ist sie nach EN 61000-6-2:2005 und EN 61000-6-4:2007 + A1:2011. Ein CE-Zeichen ist im Datenblatt des Herstellers nicht dokumentiert, eine Konformitätserklärung ist vor dem Inverkehrbringen in der EU anzufordern. Diese Platine hat \u003cstrong\u003eeinen\u003c\/strong\u003e Kanal und keinen Temperatureingang; die zweikanalige Ausführung mit Universal-Kanal ist der \u003cstrong\u003eEOME\u003c\/strong\u003e, die runde Bauform der \u003cstrong\u003eEOMD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZum Preis:\u003c\/strong\u003e Der Preis gilt die Platine in Grundausführung. Der Messbereich ist über IO-Link frei einstellbar, eine Programmierung ab Werk ist also nicht erforderlich. Wenn Sie die Platine dennoch \u003cstrong\u003eab Werk auf Ihren Messbereich programmiert\u003c\/strong\u003e haben möchten, ist das gegen Aufpreis möglich — \u003ca href=\"\/en\/pages\/contact\"\u003efragen Sie uns danach\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eVorteile auf einen Blick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEinkanaliger IO-Link-Messumformer für die DMS-Vollbrücke\u003c\/li\u003e\n\u003cli\u003eMessbereich einheitenlos und frei einstellbar, -3200,0 … +3200,0\u003c\/li\u003e\n\u003cli\u003eAuflösung 16 bit, Genauigkeit max. 0,05 % vom Messbereich\u003c\/li\u003e\n\u003cli\u003eAntwortzeit 20 ms, Filter 0,5 s\u003c\/li\u003e\n\u003cli\u003eNur 40 × 17 × 4,5 mm, Gewicht ca. 6,5 g\u003c\/li\u003e\n\u003cli\u003eBrückenspeisung 3 V, ab 350 Ω, mehrere Brücken möglich\u003c\/li\u003e\n\u003cli\u003eVersorgung 24 VDC, Standardstrom unter 30 mA\u003c\/li\u003e\n\u003cli\u003eArbeitsbereich -20 … +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306257588550,"sku":null,"price":89.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMC_MCUT-E_titelbild_13a387df-4d02-40e2-8f04-62fb467c4bc8.webp?v=1788951907"},{"product_id":"eomd-mcut-r","title":"EOMD IO-Link-Messumformer rund (MCUT-R)","description":"\u003cp\u003eDer \u003cstrong\u003eEOMD\u003c\/strong\u003e ist ein einkanaliger IO-Link-Messumformer als \u003cstrong\u003erunde\u003c\/strong\u003e OEM-Platine, Typ \u003cstrong\u003eMCUT-R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eElektrisch ist er der \u003cstrong\u003eEOMC\u003c\/strong\u003e, nur in runder Bauform: \u003cstrong\u003eØ 31,4 mm bei 4,8 mm Höhe\u003c\/strong\u003e, mit einem Befestigungsloch \u003cstrong\u003eØ 8 mm\u003c\/strong\u003e in der Mitte. Diese Form ist für Sensoren gedacht, deren Gehäuse rund ist – eine Kraftmessdose, ein Druckaufnehmer, ein Rundgehäuse mit Kabeldurchführung in der Achse.\u003c\/p\u003e\n\u003cp\u003eEr macht aus dem Signal einer DMS-Vollbrücke einen digitalen Messwert für Kraft und Druck. Der Messbereich ist im Bereich \u003cstrong\u003e-3200,0 … +3200,0\u003c\/strong\u003e frei einstellbar und \u003cstrong\u003eeinheitenlos\u003c\/strong\u003e, die Platine nimmt also die Einheit der Anwendung an. Der Kanal nimmt \u003cstrong\u003e1 × DMS-Vollbrücke\u003c\/strong\u003e ab 350 Ω auf, bei zwei parallelen Vollbrücken mindestens 2 × 700 Ω; die Brückenspeisung liefert \u003cstrong\u003e3 V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDie Auflösung beträgt \u003cstrong\u003e16 bit\u003c\/strong\u003e, die Genauigkeit \u003cstrong\u003emax. 0,05 % vom Messbereich\u003c\/strong\u003e zuzüglich Sensorfehler. Der Filter liegt bei 0,5 s, die Einschaltverzögerung unter 5 s, die Antwortzeit bei \u003cstrong\u003e20 ms\u003c\/strong\u003e. Am Ausgang steht ein \u003cstrong\u003eIO-Link-Interface\u003c\/strong\u003e mit Signalpegel 0 \/ 24 V. Versorgt wird die Platine mit \u003cstrong\u003e24 VDC\u003c\/strong\u003e bei unter 30 mA im Standardbetrieb, maximal 130 mA Gesamtstrom; Verpolung ist geschützt.\u003c\/p\u003e\n\u003cp\u003eDas Gewicht liegt bei etwa 3,5 g, Material FR4 und PBT, Anschluss über Lötpads 2,7 × 1,5 mm, Einbaulage beliebig. Der Arbeitsbereich reicht von \u003cstrong\u003e-20 °C bis +80 °C\u003c\/strong\u003e, die Lagertemperatur von -20 °C bis +85 °C.\u003c\/p\u003e\n\u003cp\u003eFür Konfiguration und Betrieb ist ein \u003cstrong\u003eIO-Link-Master\u003c\/strong\u003e erforderlich, dazu die passende IODD-Datei aus dem IODD-Finder. Die Platine trägt \u003cstrong\u003eIP00\u003c\/strong\u003e und gehört in ein Gehäuse eingebaut. Geprüft ist sie nach EN 61000-6-2:2005 und EN 61000-6-4:2007 + A1:2011. Ein CE-Zeichen ist im Datenblatt des Herstellers nicht dokumentiert, eine Konformitätserklärung ist vor dem Inverkehrbringen in der EU anzufordern. Diese Platine hat einen Kanal und keinen Temperatureingang.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZum Preis:\u003c\/strong\u003e Der Preis gilt die Platine in Grundausführung. Der Messbereich ist über IO-Link frei einstellbar, eine Programmierung ab Werk ist also nicht erforderlich. Wenn Sie die Platine dennoch \u003cstrong\u003eab Werk auf Ihren Messbereich programmiert\u003c\/strong\u003e haben möchten, ist das gegen Aufpreis möglich — \u003ca href=\"\/en\/pages\/contact\"\u003efragen Sie uns danach\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eVorteile auf einen Blick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRunde OEM-Platine Ø 31,4 × 4,8 mm mit Loch Ø 8 mm\u003c\/li\u003e\n\u003cli\u003eEinkanaliger IO-Link-Messumformer für die DMS-Vollbrücke\u003c\/li\u003e\n\u003cli\u003eMessbereich einheitenlos und frei einstellbar, -3200,0 … +3200,0\u003c\/li\u003e\n\u003cli\u003eAuflösung 16 bit, Genauigkeit max. 0,05 % vom Messbereich\u003c\/li\u003e\n\u003cli\u003eAntwortzeit 20 ms, Filter 0,5 s\u003c\/li\u003e\n\u003cli\u003eGewicht nur ca. 3,5 g\u003c\/li\u003e\n\u003cli\u003eVersorgung 24 VDC, Standardstrom unter 30 mA\u003c\/li\u003e\n\u003cli\u003eArbeitsbereich -20 … +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306258768198,"sku":null,"price":89.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMD_MCUT-R_titelbild_9597ba0b-f441-4303-a424-58a6c4a023c2.webp?v=1788951906"},{"product_id":"eome-meut-e","title":"EOME 2-Kanal-Messumformer (MEUT-E)","description":"\u003cp\u003eDer \u003cstrong\u003eEOME\u003c\/strong\u003e ist ein zweikanaliger IO-Link-Messumformer als OEM-Platine, Typ \u003cstrong\u003eMEUT-E\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKanal 1\u003c\/strong\u003e misst eine DMS-Vollbrücke, \u003cstrong\u003eKanal 2\u003c\/strong\u003e einen Temperaturfühler – und beide Messwerte gehen über ein gemeinsames IO-Link-Interface hinaus. Das ist der Fall, für den diese Platine gebaut ist: Kraft oder Druck und die dazugehörige Temperatur aus einem Gerät, mit einer Leitung und einem Master-Port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDer Universal-Kanal unterstützt keine DMS-Brücke.\u003c\/strong\u003e Das Datenblatt führt sie in der Sensorliste, schreibt darunter aber, dass DMS-Applikationen für den Universal-Kanal derzeit noch nicht unterstützt werden. Wer \u003cem\u003ezwei\u003c\/em\u003e Kraftkanäle braucht, kann diese Platine dafür heute nicht nehmen.\u003c\/p\u003e\n\u003cp\u003eKanal 1 nimmt eine \u003cstrong\u003eDMS-Vollbrücke\u003c\/strong\u003e ab 350 Ω auf, bei zwei Brücken mindestens 2 × 700 Ω, mit einer Brückenspeisung von \u003cstrong\u003e3 V\u003c\/strong\u003e; die Maßeinheit ist einheitenlos. Kanal 2 ist auf °C voreingestellt und nimmt \u003cstrong\u003ePt100\u003c\/strong\u003e in 3-Leiter-Schaltung von -200 bis 800 °C bei 0,9 mA Sensorstrom oder ein \u003cstrong\u003eThermoelement\u003c\/strong\u003e vom Typ J (-210 … 1200 °C), Typ K (-200 … 1372 °C) oder Typ N (-200 … 1300 °C) auf. Der Messbereich beider Kanäle ist im Bereich -3200,0 … +3200,0 frei einstellbar.\u003c\/p\u003e\n\u003cp\u003eDie Auflösung beträgt \u003cstrong\u003e16 bit am DMS-Kanal und 24 bit am Universal-Kanal\u003c\/strong\u003e, die Genauigkeit max. \u003cstrong\u003e0,05 % vom Messbereich\u003c\/strong\u003e zuzüglich Sensorfehler. Die Filter sind getrennt: 0,5 s für DMS, 25 s für Temperatur. Die Einschaltverzögerung liegt unter 5 s, die Antwortzeit bei 20 ms. Versorgt wird die Platine mit \u003cstrong\u003e24 VDC\u003c\/strong\u003e bei unter 30 mA im Standardbetrieb, maximal 130 mA Gesamtstrom; Verpolung ist geschützt.\u003c\/p\u003e\n\u003cp\u003eDie Platine misst \u003cstrong\u003e40 × 17 × 8,25 mm\u003c\/strong\u003e bei etwa 6,5 g. Die Bauhöhe kommt vom Aufbau: Es sind \u003cstrong\u003ezwei gestapelte Platinen\u003c\/strong\u003e. Die einkanalige Ausführung mit demselben Umriss ist nur 4,5 mm hoch. Material FR4 und PBT, Anschluss über Lötpads 2,7 × 1,5 mm, Einbaulage beliebig, Arbeitsbereich \u003cstrong\u003e-20 °C bis +80 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFür Konfiguration und Betrieb ist ein \u003cstrong\u003eIO-Link-Master\u003c\/strong\u003e erforderlich, dazu die passende IODD-Datei aus dem IODD-Finder. Die Platine trägt \u003cstrong\u003eIP00\u003c\/strong\u003e und gehört in ein Gehäuse eingebaut. Geprüft ist sie nach EN 61000-6-2:2005 und EN 61000-6-4:2007 + A1:2011. Ein CE-Zeichen ist im Datenblatt des Herstellers nicht dokumentiert, eine Konformitätserklärung ist vor dem Inverkehrbringen in der EU anzufordern. Eine Ausführung mit eingebauter Sicherheitsfunktion PL c \/ SIL 1 ist der \u003cstrong\u003eEOMF\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZum Preis:\u003c\/strong\u003e Der Preis gilt die Platine in Grundausführung. Die Messbereiche beider Kanäle sind über IO-Link frei einstellbar, eine Programmierung ab Werk ist also nicht erforderlich. Wenn Sie die Platine dennoch \u003cstrong\u003eab Werk auf Ihre Messbereiche programmiert\u003c\/strong\u003e haben möchten, ist das gegen Aufpreis möglich — \u003ca href=\"\/en\/pages\/contact\"\u003efragen Sie uns danach\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eVorteile auf einen Blick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eZwei Kanäle auf einer Platine: DMS-Vollbrücke und Temperaturfühler\u003c\/li\u003e\n\u003cli\u003eKanal 2 für Pt100 (3-Leiter) oder Thermoelement Typ J, K und N\u003c\/li\u003e\n\u003cli\u003eAuflösung 16 bit am DMS-Kanal, 24 bit am Universal-Kanal\u003c\/li\u003e\n\u003cli\u003eGenauigkeit max. 0,05 % vom Messbereich\u003c\/li\u003e\n\u003cli\u003eGetrennte Filter: 0,5 s für DMS, 25 s für Temperatur\u003c\/li\u003e\n\u003cli\u003eBeide Messwerte über ein IO-Link-Interface\u003c\/li\u003e\n\u003cli\u003e40 × 17 × 8,25 mm, zwei gestapelte Platinen, ca. 6,5 g\u003c\/li\u003e\n\u003cli\u003eArbeitsbereich -20 … +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306259030342,"sku":null,"price":134.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOME_MEUT-E_titelbild_961c1f67-c557-4ccc-a316-d76c0bc0d343.webp?v=1788951931"},{"product_id":"eomf-meuts-sil","title":"EOMF 2-Kanal-Messumformer PL c (MEUTS-SIL)","description":"\u003cp\u003eDer \u003cstrong\u003eEOMF\u003c\/strong\u003e ist ein zweikanaliger Messumformer mit eingebauter Überlastschaltung der Stufe \u003cstrong\u003ePL c \/ SIL 1\u003c\/strong\u003e, Typ \u003cstrong\u003eMEUTS-SIL\u003c\/strong\u003e, zertifiziert von TÜV Nord unter der Nummer 44 799 14098202.\u003c\/p\u003e\n\u003cp\u003eDas Besondere ist die Sicherheitsschaltung: Sie hat einen \u003cstrong\u003eeigenen Verstärker\u003c\/strong\u003e und liegt \u003cstrong\u003eparallel\u003c\/strong\u003e zur Messkette des IO-Link-Messumformers – die Schutzfunktion hängt also nicht an der Messkette. Ein Halbleiterrelais öffnet bei überschrittenem Schaltpunkt, bei zu niedriger oder fehlender Speisespannung des Messverstärkers, bei Kabelbruch an einer oder beiden Signalleitungen und bei zu niedriger oder fehlender Versorgung der Sicherheitsschaltung selbst. \u003cstrong\u003eDer sichere Zustand ist das offene Relais.\u003c\/strong\u003e Der Eingang ist hochohmig vorgespannt, damit ein Kabelbruch erkannt wird; zwei Komparatoren – einer für das Messsignal gegen den Schaltpunkt, einer für die Brückenspeisung – sind UND-verknüpft.\u003c\/p\u003e\n\u003cp\u003eZwei \u003cstrong\u003eGrenzwerte\u003c\/strong\u003e sind über IO-Link einstellbar: der Einschaltpunkt von -7 bis +7 mV, der Ausschaltpunkt von -5 bis +21 mV, bei einer Schaltgenauigkeit von ± 50 µV und einer \u003cstrong\u003eReaktionszeit von maximal 10 ms\u003c\/strong\u003e. Die Schaltlast beträgt maximal 30 VAC\/VDC bei 500 mA. Zugrunde liegen EN ISO 13849-1:2015 und EN 61508:2010.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKanal 1\u003c\/strong\u003e misst eine DMS-Vollbrücke, einheitenlos, ab 350 Ω (zwei Brücken ab 2 × 700 Ω) mit einer Brückenspeisung von 3 V. \u003cstrong\u003eKanal 2\u003c\/strong\u003e ist universal, auf °C voreingestellt, für \u003cstrong\u003ePt100\u003c\/strong\u003e in 3-Leiter-Schaltung von -200 bis 800 °C bei 0,9 mA oder ein \u003cstrong\u003eThermoelement\u003c\/strong\u003e vom Typ J (-210 … 1200 °C), Typ K (-200 … 1372 °C) oder Typ N (-200 … 1300 °C). Der Bereich beider Kanäle ist im Bereich -3200,0 … +3200,0 frei einstellbar.\u003c\/p\u003e\n\u003cp\u003eAm Ausgang stehen \u003cstrong\u003eIO-Link\u003c\/strong\u003e mit Pegel 0 \/ 24 V \u003cstrong\u003eund\u003c\/strong\u003e ein Stromausgang \u003cstrong\u003e4 … 20 mA\u003c\/strong\u003e, der über Eingang 1 läuft. Die Auflösung beträgt 16 bit am DMS-Kanal und 24 bit am Universal-Kanal, die Genauigkeit max. 0,05 % vom Messbereich zuzüglich Sensorfehler. Filter: 0,5 s für DMS, 25 s für Temperatur. Versorgung \u003cstrong\u003e24 VDC\u003c\/strong\u003e bei unter 30 mA im Standardbetrieb, maximal 130 mA Gesamtstrom.\u003c\/p\u003e\n\u003cp\u003eDie Platine misst \u003cstrong\u003e21 × 76,95 × 4,2 mm\u003c\/strong\u003e bei etwa 7,6 g, Material FR4 und PBT, Anschluss über Lötpads 2,7 × 1,5 mm, Einbaulage beliebig, Arbeitsbereich \u003cstrong\u003e-20 °C bis +80 °C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrei Montageauflagen und die Freischaltung der Grenzwerte gehören gelesen, bevor das Gehäuse zugemacht wird.\u003c\/strong\u003e Die Platine ist nach mindestens \u003cstrong\u003eIP54\u003c\/strong\u003e im Gehäuse des Sensors zu verbauen und sicher gegen Vibrationen zu schützen; die Sicherheitsschaltung ist regelmäßig auf ihre Funktion zu prüfen, der Hersteller empfiehlt \u003cstrong\u003ezwei Jahre\u003c\/strong\u003e, und die Grenzwerte sind vor der Inbetriebnahme zu überprüfen. Zum Einstellen der Grenzwerte über IO-Link muss ein \u003cstrong\u003eFototransistor\u003c\/strong\u003e (SFH 309 oder ähnlich) angeschlossen und beleuchtet sein; danach sind die Einstellungen zurückzulesen und der Fototransistor zu verdunkeln – im Normalbetrieb ist er so abzudecken, dass eine unbeabsichtigte Beleuchtung ausgeschlossen ist.\u003c\/p\u003e\n\u003cp\u003eFür Konfiguration und Betrieb ist ein \u003cstrong\u003eIO-Link-Master\u003c\/strong\u003e erforderlich, dazu die IODD-Datei aus dem IODD-Finder. Geprüft ist die Platine nach EN 61000-6-2:2005 und EN 61000-6-4:2007. Ein CE-Zeichen ist im Datenblatt des Herstellers nicht dokumentiert, eine Konformitätserklärung ist vor dem Inverkehrbringen in der EU anzufordern. Die Ausführung ohne Sicherheitsfunktion ist der \u003cstrong\u003eEOME\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZum Preis:\u003c\/strong\u003e Der Preis gilt die Platine in Grundausführung. Messbereiche und Grenzwerte sind über IO-Link einstellbar, eine Programmierung ab Werk ist also nicht erforderlich. Wenn Sie die Platine \u003cstrong\u003eab Werk auf Ihre Messbereiche und Schaltpunkte programmiert\u003c\/strong\u003e haben möchten, ist das gegen Aufpreis möglich — \u003ca href=\"\/en\/pages\/contact\"\u003efragen Sie uns danach\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eVorteile auf einen Blick\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eÜberlastschaltung PL c \/ SIL 1, TÜV Nord 44 799 14098202\u003c\/li\u003e\n\u003cli\u003eSicherheitsschaltung mit eigenem Verstärker, parallel zur Messkette\u003c\/li\u003e\n\u003cli\u003eRelais öffnet auch bei Kabelbruch und Unterspannung – sicherer Zustand offen\u003c\/li\u003e\n\u003cli\u003eZwei Grenzwerte über IO-Link einstellbar, Reaktionszeit max. 10 ms\u003c\/li\u003e\n\u003cli\u003eAusgänge IO-Link und 4 … 20 mA\u003c\/li\u003e\n\u003cli\u003eKanal 1 DMS-Vollbrücke, Kanal 2 Pt100 oder Thermoelement\u003c\/li\u003e\n\u003cli\u003eAuflösung 16 bit DMS, 24 bit Universal, Genauigkeit max. 0,05 %\u003c\/li\u003e\n\u003cli\u003e21 × 76,95 × 4,2 mm, ca. 7,6 g, Arbeitsbereich -20 … +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"octogon Shop","offers":[{"title":"Default Title","offer_id":57306259620166,"sku":null,"price":369.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/files\/EOMF_MEUTS-SIL_titelbild_b1ff3cac-f6c1-4f9f-be9f-e3eea90af3e2.webp?v=1788951931"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5558\/6374\/collections\/blog-io-link-waegezelle.webp?v=1789028781","url":"https:\/\/octogon-sensors.com\/en\/collections\/io-link-sensoren-messelektronik.oembed","provider":"octogon GmbH","version":"1.0","type":"link"}